Hi,Alex
I have already sent the patch set of ls1028aqds i2c dm. Please check the patchwork link below： https://patchwork.ozlabs.org/project/uboot/list/?series=118709
thanks, Chaunhua
-----Original Message----- From: Alex Marginean alexandru.marginean@nxp.com Sent: 2019年7月12日 19:23 To: u-boot@lists.denx.de Cc: Chuanhua Han chuanhua.han@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; Alex Marginean alexm.osslist@gmail.com Subject: [PATCH 2/2] configs: ls1028aqds: enable I2C and GPIO DM
LS1028A was already converted to I2C/GPIO DM, move the QDS board over too.
Signed-off-by: Alex Marginean alexm.osslist@gmail.com
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 5 ++++- configs/ls1028aqds_tfa_defconfig | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 4a2b354008..76c9af5ef3 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028AQDS=y +CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_SECURE_BOOT=y CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_TFABOOT=y @@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -31,6 +31,9 @@ CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index b315910414..7c98474d73 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028AQDS=y +CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_TFABOOT=y CONFIG_NR_DRAM_BANKS=2 @@ -7,7 +8,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -34,6 +34,9 @@ CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_DM_SPI_FLASH=y -- 2.17.1