Re: [U-Boot] [U-Boot, v4, 1/1] Initial support for Silica Pengwyn board

On Fri, Jan 31, 2014 at 05:34:14PM +0100, Lothar Felten wrote:

This patch add support for the Silica Pengwyn board [1] The board is based on a TI AM3354 CPU [2] All jumpers removed it will boot from the SDcard, the console is on UART1 accessible via the FDTI -> USB. The on board NAND flash is supported and can act as boot medium, depending on jumper settings. USB Host, USB Device and Ethernet are also provided but untested.

[1] http://www.silica.com/product/silica-pengwyn-board.html [2] http://www.ti.com/product/am3354

Signed-off-by: Lothar Felten lothar.felten@gmail.com

Applied to u-boot-ti/master, thanks!