On Tue, Aug 11, 2020 at 05:02:59PM +0200, Jan Kiszka wrote:
On 11.08.20 16:56, Tom Rini wrote:
On Tue, Aug 11, 2020 at 04:02:37PM +0530, Lokesh Vutla wrote:
Hi Tom, Please find the pull request for v2020.10-rc3 containing TI specific changes. This should have been sent for rc2 but delayed due to some comments in the last minute. Please look at the PR description for the details on the PR.
Travis-CI build: https://travis-ci.org/github/lokeshvutla/u-boot/builds/716796052
The following changes since commit c045207f96f7f7ae8c7f1341111a6010e636176b:
Prepare v2020.10-rc2 (2020-08-10 16:10:09 -0400)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/ti-v2020.10-rc3
for you to fetch changes up to ce2e881bb791dca33b122fd901820deef303f6df:
arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port (2020-08-11 10:22:11 +0530)
Below are the major changes in this PR:
- Added support for J7200 evm
- DM_ETH and DM_USB migrations for omap3
- USB DFU and mass storage support for AM65x evm
- RTI watchdog support for K3 devices
- Fix an issue with L3 cache on K3 devices
Andrew F. Davis (1): arm: mach-k3: Clean non-coherent lines out of L3 cache
Dave Gerlach (1): arm: dts: k3-j7200: Add R5 specific dts support
Derald D. Woods (1): ARM: omap3: evm: Complete DM_ETH and DM_USB migrations
Faiz Abbas (14): mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value spl: usb: Create an API spl_usb_load() spl: usb: Only init usb once armv7R: K3: am654: Use full malloc in SPL both pre and post reloc arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes arm: mach-k3: am6_init: Add support for USB boot mode arm: dts: k3-am654-r5-base-board: Add USB0 nodes arm: dts: k3-am654-base-board: Add support for USB0 in SPL configs: am65x_evm: Add support for DFU related configs configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes configs: Add defconfig for USB DFU bootmode configs: Add new config for supporting USB mass storage boot
Jan Kiszka (3): watchdog: Add support for K3 RTI watchdog arm: dts: k3: Add RTI watchdogs am654_sdhci: mmc fail to send stop cmd
OK, so the last change from Jan here is:
commit 6bc290047b6e0209dd8183ce78be2f9297feb3c6 Author: Jan Kiszka jan.kiszka@web.de Date: Sat Jul 18 16:47:04 2020 +0200
am654_sdhci: mmc fail to send stop cmd Hi all, on one device with one specific SD-card (possibly an aging one), I'm seeing frequent "mmc fail to send stop cmd" messages, followed by read errors when loading kernel and dtb. -ETIMEDOUT is returned by mmd_send_cmd. However, I can always resolve this by simply retrying the stop command like this: Hardware is our IOT2050, baseline is today's master (1c4b5038afcc) with board-enabling and a bunch of patches from your tree [1]. However, already 4d6da10ce611 exposes the problem. What could cause this? Jan [1] https://github.com/siemens/u-boot/commits/jan/iot2050diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d79cdef62ed2..2aca8d3a4d32 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -407,7 +407,11 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) pr_err("mmc fail to send stop cmd\n"); #endif
return 0;
pr_err("retrying...\n");if (mmc_send_cmd(mmc, &cmd, NULL)) {pr_err("failed again\n");return 0;}Which is a generic MMC change, grows everyone by a little bit and lacks both an S-o-B from the author and Reviewed-by of the MMC maintainer. Please drop this patch. Thanks!
That was an instrumentation hunk for the issue described above. Never intended to be a patch.
I kind of thought that might be the case from the description, thanks for clarifying.