From: Peng Fan peng.fan@nxp.com
The return value is int type, not sc_err_t(u8), correct the usage.
Signed-off-by: Peng Fan peng.fan@nxp.com Tested-by: Oliver Graute oliver.graute@kococonnector.com Reviewed-by: Oliver Graute oliver.graute@kococonnector.com --- board/advantech/imx8qm_dmsse20_a1/spl.c | 6 +++--- board/advantech/imx8qm_rom7720_a1/spl.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/advantech/imx8qm_dmsse20_a1/spl.c b/board/advantech/imx8qm_dmsse20_a1/spl.c index 7f2e972425b..f36caece7d7 100644 --- a/board/advantech/imx8qm_dmsse20_a1/spl.c +++ b/board/advantech/imx8qm_dmsse20_a1/spl.c @@ -111,7 +111,7 @@ int board_mmc_init(struct bd_info *bis) switch (i) { case 0: ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_0, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret;
imx8_iomux_setup_multiple_pads(emmc0, ARRAY_SIZE(emmc0)); @@ -120,10 +120,10 @@ int board_mmc_init(struct bd_info *bis) break; case 1: ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_2, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret; ret = sc_pm_set_resource_power_mode(-1, SC_R_GPIO_4, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret;
imx8_iomux_setup_multiple_pads(usdhc2_sd, ARRAY_SIZE(usdhc2_sd)); diff --git a/board/advantech/imx8qm_rom7720_a1/spl.c b/board/advantech/imx8qm_rom7720_a1/spl.c index b602437c35b..922bb0b7d43 100644 --- a/board/advantech/imx8qm_rom7720_a1/spl.c +++ b/board/advantech/imx8qm_rom7720_a1/spl.c @@ -112,7 +112,7 @@ int board_mmc_init(struct bd_info *bis) switch (i) { case 0: ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_0, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret;
imx8_iomux_setup_multiple_pads(emmc0, ARRAY_SIZE(emmc0)); @@ -121,10 +121,10 @@ int board_mmc_init(struct bd_info *bis) break; case 1: ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_2, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret; ret = sc_pm_set_resource_power_mode(-1, SC_R_GPIO_4, SC_PM_PW_MODE_ON); - if (ret != SC_ERR_NONE) + if (ret) return ret;
imx8_iomux_setup_multiple_pads(usdhc2_sd, ARRAY_SIZE(usdhc2_sd));