On Wed, Aug 30, 2017 at 2:00 PM, Suresh Gupta suresh.gupta@nxp.com wrote:
It is recommended to check either controller is free to take new spi action. The IP_ACC and AHB_ACC bits indicates that the controller is busy in IP or AHB mode respectively. And the BUSY bit indicates that controller is currently busy handling a transaction to an external flash device
Signed-off-by: Suresh Gupta suresh.gupta@nxp.com
Chnages in v3:
- replace printf to debug
- return whatever return from wait_for_bit, before it was -EBUSY
Changes in v2:
- Add wait_for_bit instead of while
- move the busy check code to fsl_qspi_claim_bus form qspi_xfer
drivers/spi/fsl_qspi.c | 28 +++++++++++++++++++++++++++- drivers/spi/fsl_qspi.h | 4 ++++ 2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index 1dfa89a..8f0f29e 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -14,6 +14,7 @@ #include <dm.h> #include <errno.h> #include <watchdog.h> +#include <wait_bit.h> #include "fsl_qspi.h"
DECLARE_GLOBAL_DATA_PTR; @@ -991,7 +992,7 @@ static int fsl_qspi_probe(struct udevice *bus) struct fsl_qspi_platdata *plat = dev_get_platdata(bus); struct fsl_qspi_priv *priv = dev_get_priv(bus); struct dm_spi_bus *dm_spi_bus;
int i;
int i, ret; dm_spi_bus = bus->uclass_priv;@@ -1011,6 +1012,18 @@ static int fsl_qspi_probe(struct udevice *bus) priv->flash_num = plat->flash_num; priv->num_chipselect = plat->num_chipselect;
/* make sure controller is not busy anywhere */ret = wait_for_bit(__func__, &priv->regs->sr,QSPI_SR_BUSY_MASK |QSPI_SR_AHB_ACC_MASK |QSPI_SR_IP_ACC_MASK,false, 1000, false);
100ms not enough?
thanks!