Newer Blackfin's have an on-chip rom with a syscontrol() function that needs to be used to properly program the memory and voltage settings as it will include (possibly critical) factory tested bias values.
Signed-off-by: Mike Frysinger vapier@gentoo.org --- cpu/blackfin/initcode.c | 58 ++++++++++++++++++++++++++++++----------------- 1 files changed, 37 insertions(+), 21 deletions(-)
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index 4890616..19ad7b2 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -296,34 +296,50 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SIC_IWR(1); #endif
- serial_putc('L'); + /* With newer bootroms, we use the helper function to set up + * the memory controller. Older bootroms lacks such helpers + * so we do it ourselves. + */ + if (BOOTROM_CAPS_SYSCONTROL) { + serial_putc('S');
- bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); + ADI_SYSCTRL_VALUES memory_settings; + memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL; + memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL; + memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL; + memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL; + syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT | + (CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL); + } else { + serial_putc('L');
- serial_putc('A'); + bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
- /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { - serial_putc('!'); - bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); - asm("idle;"); - } + serial_putc('A');
- serial_putc('C'); + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + serial_putc('!'); + bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); + asm("idle;"); + }
- bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); + serial_putc('C');
- serial_putc('K'); + bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
- /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { - serial_putc('!'); - bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); - asm("idle;"); + serial_putc('K'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { + serial_putc('!'); + bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); + asm("idle;"); + } }
/* Since we've changed the SCLK above, we may need to update