Hi,
this series is correcting RTC uclass behavior to match RTC aliases to enable RTC_EMULATION driver with ZYNQMP driver. If DT node is present ZynqMP RTC is used. If not RTC emaulation is used.
The driver has been tested on Xilinx zcu104 also with booting to Linux to make sure that U-Boot format match with Linux format.
Thanks, Michal
Michal Simek (4): dm: rtc: uclass: Add flag to control sequence numbering cmd: date: rtc: Update command to read the first RTC with seq 0 rtc: zynqmp: Add support for ZynqMP RTC xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver
MAINTAINERS | 1 + cmd/date.c | 9 +- configs/xilinx_zynqmp_virt_defconfig | 2 + drivers/rtc/Kconfig | 7 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-uclass.c | 1 + drivers/rtc/zynqmp_rtc.c | 158 +++++++++++++++++++++++++++ 7 files changed, 176 insertions(+), 3 deletions(-) create mode 100644 drivers/rtc/zynqmp_rtc.c