This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller.
Signed-off-by: Ron Madrid ron_madrid@sbcglobal.net --- drivers/net/tsec.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index d7da081..c9aa29d 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1141,6 +1141,9 @@ struct phy_info phy_info_M88E1118 = { {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, {0x16, 0x0002, NULL}, /* Change Page Number */ {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */ + {0x16, 0x0003, NULL}, /* Change Page Number */ + {0x10, 0x021e, NULL}, /* Adjust LED control */ + {0x16, 0x0000, NULL}, /* Change Page Number */ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, @@ -1152,6 +1155,7 @@ struct phy_info phy_info_M88E1118 = { /* Status is read once to clear old link state */ {MIIM_STATUS, miim_read, NULL}, /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, /* Read the status */ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},