On 07/11, 2016, 11:17 PM, York Wrote:
On 07/11/2016 12:49 AM, Yunhui Cui wrote:
From: Yunhui Cui yunhui.cui@nxp.com
Errata: A-009282: QuadSPI data pre-fetch can result in incorrect data
Signed-off-by: Yunhui Cui yunhui.cui@nxp.com
drivers/spi/fsl_qspi.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index 75cbab2..99634db 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -438,14 +438,24 @@ static void qspi_enable_ddr_mode(struct
fsl_qspi_priv *priv)
static void qspi_init_ahb_read(struct fsl_qspi_priv *priv) { struct fsl_qspi_regs *regs = priv->regs;
int rx_size = 0x80;
/* AHB configuration for access buffer 0/1/2 .*/ qspi_write32(priv->flags, ®s->buf0cr,
QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf1cr,
QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf2cr,
QSPI_BUFXCR_INVALID_MSTRID);
- qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
(0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) \
- || defined(CONFIG_LS1012A) || defined(CONFIG_LS102XA)
- /*A-009282: QuadSPI data pre-fetch can result in incorrect data
*Workaround: Keep the read data size to 64 bits (8 Bytes), which*disables the prefetch on the AHB buffer,and prevents this issue*from occurring.- */
- rx_size = 0x1;
+#endif
- qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
(rx_size << QSPI_BUF3CR_ADATSZ_SHIFT));Yunhui,
I suggested to use erratum macro, like CONFIG_SYS_FSL_ERRATUM_A009282.
[Yunhui] ok, I will update it in v3, thanks a lot.
York