From: Nathan Barrett-Morrison nathan.morrison@timesys.com
This adds support for the MUSB-based USB controller found in the Analog Devices SC57x and SC58x SoCs.
Co-developed-by: Greg Malysa greg.malysa@timesys.com Signed-off-by: Greg Malysa greg.malysa@timesys.com Co-developed-by: Ian Roberts ian.roberts@timesys.com Signed-off-by: Ian Roberts ian.roberts@timesys.com Signed-off-by: Vasileios Bimpikas vasileios.bimpikas@analog.com Signed-off-by: Utsav Agarwal utsav.agarwal@analog.com Signed-off-by: Arturs Artamonovs arturs.artamonovs@analog.com Signed-off-by: Nathan Barrett-Morrison nathan.morrison@timesys.com ---
MAINTAINERS | 1 + drivers/usb/musb-new/Kconfig | 7 ++ drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/sc5xx.c | 202 ++++++++++++++++++++++++++++++++++ 4 files changed, 211 insertions(+) create mode 100644 drivers/usb/musb-new/sc5xx.c
diff --git a/MAINTAINERS b/MAINTAINERS index 7d07d13dbc..3bcdb73e6e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -615,6 +615,7 @@ F: drivers/gpio/gpio-adi-adsp.c F: drivers/pinctrl/pinctrl-adi-adsp.c F: drivers/serial/serial_adi_uart4.c F: drivers/timer/adi_sc5xx_timer.c +F: drivers/usb/musb-new/sc5xx.c F: include/env/adi/
ARM SNAPDRAGON diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index c52afd41a7..ad9072a532 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -22,6 +22,13 @@ config USB_MUSB_GADGET Enables the MUSB USB dual-role controller in gadget mode.
if USB_MUSB_HOST || USB_MUSB_GADGET +config USB_MUSB_SC5XX + bool "Analog Devices MUSB support" + depends on (SC57X || SC58X) + help + Say y here to enable support for the USB controller on + ADI SC57X/SC58X processors. + config USB_MUSB_DA8XX bool "Enable DA8xx MUSB Controller" depends on ARCH_DAVINCI diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile index 396ff02654..6638772dac 100644 --- a/drivers/usb/musb-new/Makefile +++ b/drivers/usb/musb-new/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_USB_MUSB_PIC32) += pic32.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o obj-$(CONFIG_USB_MUSB_TI) += ti-musb.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o +obj-$(CONFIG_USB_MUSB_SC5XX) += sc5xx.o
ccflags-y := $(call cc-option,-Wno-unused-variable) \ $(call cc-option,-Wno-unused-but-set-variable) \ diff --git a/drivers/usb/musb-new/sc5xx.c b/drivers/usb/musb-new/sc5xx.c new file mode 100644 index 0000000000..16201480b4 --- /dev/null +++ b/drivers/usb/musb-new/sc5xx.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2022 - Analog Devices, Inc. + * + * ADI SC5XX MUSB "glue layer" + * + * Written and/or maintained by Timesys Corporation + * + * Loosely ported from Linux driver: + * Author: Nathan Barrett-Morrison nathan.morrison@timesys.com + * + */ + +#include <dm.h> +#include <dm/device_compat.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/usb/musb.h> +#include "linux-compat.h" +#include "musb_core.h" +#include "musb_uboot.h" + +#define MUSB_SOFTRST 0x7f +#define MUSB_SOFTRST_NRST BIT(0) +#define MUSB_SOFTRST_NRSTX BIT(1) + +#define REG_USB_VBUS_CTL 0x380 +#define REG_USB_ID_CTL 0x382 +#define REG_USB_PHY_CTL 0x394 +#define REG_USB_PLL_OSC 0x398 +#define REG_USB_UTMI_CTL 0x39c + +/* controller data */ +struct sc5xx_musb_data { + struct musb_host_data mdata; + struct device dev; +}; + +#define to_sc5xx_musb_data(d) \ + container_of(d, struct sc5xx_musb_data, dev) + +static void sc5xx_musb_disable(struct musb *musb) +{ + /* no way to shut the controller */ +} + +static int sc5xx_musb_enable(struct musb *musb) +{ + /* soft reset by NRSTx */ + musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX); + /* set mode */ + musb_platform_set_mode(musb, musb->board_mode); + + return 0; +} + +static irqreturn_t sc5xx_interrupt(int irq, void *hci) +{ + struct musb *musb = hci; + irqreturn_t ret = IRQ_NONE; + u8 devctl; + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb & MUSB_INTR_VBUSERROR) { + musb->int_usb &= ~MUSB_INTR_VBUSERROR; + devctl = musb_readw(musb->mregs, MUSB_DEVCTL); + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + } + if (musb->int_usb || musb->int_tx || musb->int_rx) { + musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); + musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); + musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); + ret = musb_interrupt(musb); + } + + if (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb)) + musb_writeb(musb->mregs, REG_USB_VBUS_CTL, 0x0); + + return ret; +} + +static int sc5xx_musb_set_mode(struct musb *musb, u8 mode) +{ + struct device *dev = musb->controller; + struct sc5xx_musb_data *pdata = to_sc5xx_musb_data(dev); + + switch (mode) { + case MUSB_HOST: + musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x1); + break; + case MUSB_PERIPHERAL: + musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x3); + break; + case MUSB_OTG: + musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x0); + break; + default: + dev_err(dev, "unsupported mode %d\n", mode); + return -EINVAL; + } + + return 0; +} + +static int sc5xx_musb_init(struct musb *musb) +{ + struct sc5xx_musb_data *pdata = to_sc5xx_musb_data(musb->controller); + + musb->isr = sc5xx_interrupt; + + musb_writel(musb->mregs, REG_USB_PLL_OSC, 20 << 1); + musb_writeb(musb->mregs, REG_USB_VBUS_CTL, 0x0); + musb_writeb(musb->mregs, REG_USB_PHY_CTL, 0x80); + musb_writel(musb->mregs, REG_USB_UTMI_CTL, + 0x40 | musb_readl(musb->mregs, REG_USB_UTMI_CTL)); + + return 0; +} + +const struct musb_platform_ops sc5xx_musb_ops = { + .init = sc5xx_musb_init, + .set_mode = sc5xx_musb_set_mode, + .disable = sc5xx_musb_disable, + .enable = sc5xx_musb_enable, +}; + +static struct musb_hdrc_config sc5xx_musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +/* has one MUSB controller which can be host or gadget */ +static struct musb_hdrc_platform_data sc5xx_musb_plat = { + .mode = MUSB_HOST, + .config = &sc5xx_musb_config, + .power = 100, + .platform_ops = &sc5xx_musb_ops, +}; + +static int musb_usb_probe(struct udevice *dev) +{ + struct usb_bus_priv *priv = dev_get_uclass_priv(dev); + struct sc5xx_musb_data *pdata = dev_get_priv(dev); + struct musb_host_data *mdata = &pdata->mdata; + void __iomem *mregs; + int ret; + + priv->desc_before_addr = true; + + mregs = dev_remap_addr(dev); + if (!mregs) + return -EINVAL; + + /* init controller */ + if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) { + mdata->host = musb_init_controller(&sc5xx_musb_plat, + &pdata->dev, mregs); + if (!mdata->host) + return -EIO; + + ret = musb_lowlevel_init(mdata); + } else { + sc5xx_musb_plat.mode = MUSB_PERIPHERAL; + mdata->host = musb_register(&sc5xx_musb_plat, &pdata->dev, mregs); + if (!mdata->host) + return -EIO; + } + return ret; +} + +static int musb_usb_remove(struct udevice *dev) +{ + struct sc5xx_musb_data *pdata = dev_get_priv(dev); + + musb_stop(pdata->mdata.host); + + return 0; +} + +static const struct udevice_id sc5xx_musb_ids[] = { + { .compatible = "adi,sc5xx-musb" }, + { } +}; + +U_BOOT_DRIVER(usb_musb) = { + .name = "sc5xx-musb", + .id = UCLASS_USB, + .of_match = sc5xx_musb_ids, + .probe = musb_usb_probe, + .remove = musb_usb_remove, +#ifdef CONFIG_USB_MUSB_HOST + .ops = &musb_usb_ops, +#endif + .plat_auto = sizeof(struct usb_plat), + .priv_auto = sizeof(struct sc5xx_musb_data), +};