Hi Asif,
On 02/24/2012 04:43 PM, Asif Sulikeri wrote:
Thanks Graeme,
replies in-line,
Appreciated (after all, that is ML etiquette)
On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.russ@gmail.com mailto:graeme.russ@gmail.com> wrote:
Hi Asif, On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri <asifiqbal.rs@gmail.com <mailto:asifiqbal.rs@gmail.com>> wrote: > Hi, any updates on this, this is a blocker for me, and waiting for your > suggestions to resolve this issue. > > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri <asifiqbal.rs@gmail.com <mailto:asifiqbal.rs@gmail.com>>wrote: > >> Detlev Zundel <dzu <at> denx.de <http://denx.de>> writes: >> >> Appreciate your reply Detlev, please find my replies in-line, >> >> > what is the "DM365-IPNC-1.0.14" version about? I cannot see such a >> > version (or tag) in mainline U-Boot. >> >> I'm sorry for the typo that is supposed to be 1.0.1. >Don't expect much response if you stay with version 1.0.1I'm sorry for all the confusion, the u-boot version is actually 1.3.4 and 1.0.1 is added as a suffix for internal use, sorry for that. Am I still not liable to get help for this version(1.3.4) of u-boot?
Nope - 1.3.4 is 3.5 years old - more than half of the commits in mainline have been applied since then.
>> > On the other hand, davinci_dm365evm is a supported configuration in >> > mainline, so why not try current code. This way we would be in a much >> > better position to help you. >> > >> >> I'll consider the suggestion, but since I've spent considerable time on >> this, >> want to make sure where actually the problem lies. Have you tried the suggestion of using the current mainline code? If the problem still exists in latest mainline, you stand a fair chance that we'll make an effort to help you out :):) Thats definitely not the way you bail me out ;), jokes apart, I did try using u-boot-2010.06 but the u-boot binary generated is bulky 252KB, as compared the usual 150KB, this leads to another blocker as the UBL(User Boot Loader) is now unable to load this bulky u-boot into RAM(or may be some other issue), and gets stuck as below:
Well 2010.06 is also very old - the latest release is 2011.12
And the increase of 100kB is massive - are you sure you are compiling with the same set of options defined in the board config file? If you are sure, then it would be interesting to find out what has caused it. Could you try some intermediate releases (2008.10 is the next release after 1.3.4)
DM36x initialization passed! TI UBL Base Version: 1.50 Boot Loader BootMode = NAND Starting NAND Copy... Valid magicnum, 0xA1ACED66, found in block 0x00000008. Boot Mode Task Completed
IPNC UBL Version: 1.1.0 Platform: DM365
Jumping to entry point at 0x81080000
and there's no response whatsoever after this. what might be the issue now?
This is outside my knowledge - I've Cc'd the davinci_dm365evm (Sandeep Paulraj), maybe he can provide some pointers...
Regards,
Graeme