In message 009201c443c6$3c664f20$3136a8c0@sassenage.massy.thalesees.com you wrote:
When running U-boot on ML300 board, I don't receive any character on the = serial port.
I worked so:
*I downloaded a reference design given by xilinx. *With the xparameters.h, I compiled U-boot *I put U-boot in \sw\os\linux\kernel....I rename it on zImage.embedded.
Whay the heck do you think U-Boot needs to be copied to some Linux kernel directory?
*I generate my ace file, and nothing happens when running it on the ML300 board.
Attach a debugger, and check what your processoir is doing. Also make sure your serial port is configured correctly, i. e. without flow control, etc.
Have I done a mistake?
Yes, at least one:
------=_NextPart_000_008F_01C443D6.FEC210D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
Please NEVER post HTML to the list!!!!
Wolfgang Denk