When MMU is already enabled then dcache_enable() does not call mmu_setup() and so setup_all_pgtables() is also never called.
In this situation when some driver calls mmu_set_region_dcache_behaviour() function then U-Boot crashes with error message:
Emergency page table not setup.
Fix this issue by explicitly calling setup_all_pgtables() in dcache_enable() function near condition for mmu_setup().
This change fixes chainloading U-Boot from U-Boot on Turris Mox board which uses mvneta ethernet driver which calls mmu_set_region_dcache_behaviour().
Signed-off-by: Pali Rohár pali@kernel.org --- arch/arm/cpu/armv8/cache_v8.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index e4736e564366..2a226fd0633d 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -503,6 +503,10 @@ void dcache_enable(void) mmu_setup(); }
+ /* Set up page tables only once (it is done also by mmu_setup()) */ + if (!gd->arch.tlb_fillptr) + setup_all_pgtables(); + set_sctlr(get_sctlr() | CR_C); }