With sifive_fu540_spl_defconfig:
U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from 1st partition of SD card (replace fw_payload.bin with u-boot.itb) into RAM.
U-boot SPL expects u-boot.itb FIT image in the 1st partition of SD card irrespective of GUID
Signed-off-by: Pragnesh Patel pragnesh.patel@sifive.com --- configs/sifive_fu540_spl_defconfig | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 configs/sifive_fu540_spl_defconfig
diff --git a/configs/sifive_fu540_spl_defconfig b/configs/sifive_fu540_spl_defconfig new file mode 100644 index 0000000000..4053743f4c --- /dev/null +++ b/configs/sifive_fu540_spl_defconfig @@ -0,0 +1,26 @@ +CONFIG_RISCV=y +CONFIG_ENV_SIZE=0x20000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_TARGET_SIFIVE_FU540=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_MISC=y +CONFIG_EMEMORY_OTP=y +CONFIG_MISC_INIT_R=y +CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_OF_SEPARATE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_MTD=y +CONFIG_SPL=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=1 +CONFIG_SPL_CLK=y +CONFIG_SPL_PAYLOAD="u-boot.itb"