Current H616 DRAM driver is completely customized to Orange Pi Zero2 board, which is currently the only H616 board supported by U-Boot. Needless to say, this is not ideal for adding new boards. With changes in this series, all DDR3 boards are supported and all that is needed is just vendor DRAM values extracted from Android image. New DRAM types should also be easier to support, since a lot of constants used before are not really DRAM type dependent.
Changes were verified by decompiling driver and generated values were compared to previous, hard coded ones. This was done without dram_para structures, so compiler was able to heavily optimize code and produce constants.
Please take a look.
Best regards, Jernej
Jernej Skrabec (8): sunxi: Fix write to H616 DRAM CR register sunxi: cosmetic: Fix H616 DRAM driver code style sunxi: parameterize H616 DRAM ODT values sunxi: Convert H616 DRAM options to single setting sunxi: Always configure ODT on H616 DRAM sunxi: Make bit delay function in H616 DRAM code void sunxi: Parameterize bit delay code in H616 DRAM driver sunxi: Parameterize H616 DRAM code some more
.../include/asm/arch-sunxi/dram_sun50i_h616.h | 18 + arch/arm/mach-sunxi/Kconfig | 67 +-- arch/arm/mach-sunxi/dram_sun50i_h616.c | 445 +++++++++++------- configs/orangepi_zero2_defconfig | 8 +- 4 files changed, 348 insertions(+), 190 deletions(-)