On Tue, May 07, 2019 at 12:25:29PM -0500, Andreas Dannenberg wrote:
TI K3 SoCs like the AM654x devices are fundamentally dependent on a firmware called SYSFW (System Firmware) being loaded into the dedicated DMSC (Device Management and Security Controller) processor to provide various services via TISCI (Texas Instruments System Control Interface) to manage device aspects such as core bringup, power, clocks, security, and so on across the entire SoC.
[snip]
While I also have a working solution based on the existing FS loader framework this has its own challenges, namely by its very nature only addressing a subset of our use cases (no eMMC/SD RAW boot support for example), being heavier on resource usage (needing to use ENV to pass parameters), and not addressing the need to probe the boot peripheral. This particular framework works well for use cases requiring to load firmware from FS-based media once DDR is up and U-Boot is in a more "initialized" state but it is not a one-fits all solution for very early use in SPL board_init_f() accross different boot modes.
I think one thing that might help here is to post this alternative solution and provide the 'size' information for both series. In addition, build something like am335x_evm and socfpga_stratix10 for both series and include their before/after 'size' info too. Thanks!