On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we disable UEC6 and UEC8 by default.
Signed-off-by: Haiying Wang Haiying.Wang@freescale.com --- include/configs/MPC8569MDS.h | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 81df4c8..62507fe 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -366,6 +366,31 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII #endif /* CONFIG_SYS_UCC_RGMII_MODE */ #endif /* CONFIG_UEC_ETH4 */ + +#undef CONFIG_UEC_ETH6 /* GETH6 */ +#define CONFIG_HAS_ETH5 + +#ifdef CONFIG_UEC_ETH6 +#define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */ +#define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH +#define CONFIG_SYS_UEC6_PHY_ADDR 4 +#define CONFIG_SYS_UEC6_INTERFACE_MODE ENET_1000_SGMII +#endif /* CONFIG_UEC_ETH6 */ + +#undef CONFIG_UEC_ETH8 /* GETH8 */ +#define CONFIG_HAS_ETH7 + +#ifdef CONFIG_UEC_ETH8 +#define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */ +#define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH +#define CONFIG_SYS_UEC8_PHY_ADDR 6 +#define CONFIG_SYS_UEC8_INTERFACE_MODE ENET_1000_SGMII +#endif /* CONFIG_UEC_ETH8 */ + #endif /* CONFIG_QE */
#if defined(CONFIG_PCI)