Dne sreda, 06. januar 2021 ob 16:41:02 CET je André Przywara napisal(a):
On 03/01/2021 10:00, Jernej Skrabec wrote:
Updated H6 DT files are based on Linux 5.11-rc1 release.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net
That looks alright, but it seems like the OrangePi One Plus .dts is not updated?
I missed that one.
Best regards, Jernej
Cheers, Andre
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 70 +++- arch/arm/dts/sun50i-h6-cpu-opp.dtsi | 117 +++++++ arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 71 +++- arch/arm/dts/sun50i-h6-orangepi.dtsi | 72 +++- arch/arm/dts/sun50i-h6-pine-h64.dts | 102 ++++-- arch/arm/dts/sun50i-h6.dtsi | 394 ++++++++++++++++++++-- 6 files changed, 758 insertions(+), 68 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-cpu-opp.dtsi
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-
h6-beelink-gs1.dts
index 0dc33c90dd60..7c9dbde645b5 100644 --- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts @@ -1,11 +1,10 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/*
- Copyright (C) 2019 Clément Péron peron.clem@gmail.com
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Clément Péron peron.clem@gmail.com
/dts-v1/;
#include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -25,6 +24,7 @@ connector { compatible = "hdmi-connector"; type = "a";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */port { hdmi_con_in: endpoint {
@@ -33,6 +33,13 @@ }; };
- ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <32768>;clock-output-names = "ext_osc32k";- };
- leds { compatible = "gpio-leds";
@@ -51,12 +58,38 @@ regulator-max-microvolt = <5000000>; regulator-always-on; };
- sound-spdif {
compatible = "simple-audio-card";simple-audio-card,name = "sun50i-h6-spdif";simple-audio-card,cpu {sound-dai = <&spdif>;};simple-audio-card,codec {sound-dai = <&spdif_out>;};- };
- spdif_out: spdif-out {
#sound-dai-cells = <0>;compatible = "linux,spdif-dit";- };
+};
+&cpu0 {
- cpu-supply = <®_dcdca>;
};
&de { status = "okay"; };
+&dwc3 {
- status = "okay";
+};
&ehci0 { status = "okay"; }; @@ -64,12 +97,17 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
- phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_aldo2>; status = "okay";
};
+&gpu {
- mali-supply = <®_dcdcc>;
- status = "okay";
+};
&hdmi { status = "okay"; }; @@ -201,13 +239,16 @@ reg_dcdca: dcdca { regulator-always-on; regulator-min-microvolt =
<810000>;
regulator-max-microvolt =
<1080000>;
regulator-max-microvolt =
<1160000>;
regulator-ramp-delay = <2500>; regulator-name = "vdd-cpu"; }; reg_dcdcc: dcdcc {regulator-enable-ramp-delay =
<32000>;
regulator-min-microvolt =
<810000>;
regulator-max-microvolt =
<1080000>;
regulator-ramp-delay = <2500>; regulator-name = "vdd-gpu"; };@@ -232,6 +273,11 @@ }; };
+&r_ir {
- linux,rc-map-name = "rc-beelink-gs1";
- status = "okay";
+};
&r_pio { /* * PL0 and PL1 are used for PMIC I2C @@ -243,6 +289,14 @@ vcc-pm-supply = <®_aldo1>; };
+&rtc {
- clocks = <&ext_osc32k>;
+};
+&spdif {
- status = "okay";
+};
&uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; @@ -258,3 +312,7 @@ usb0_vbus-supply = <®_vcc5v>; status = "okay"; };
+&usb3phy {
- status = "okay";
+}; diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/arch/arm/dts/sun50i-h6-
cpu-opp.dtsi
new file mode 100644 index 000000000000..1a5eddc5a40f --- /dev/null +++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman megous@megous.com +// Copyright (C) 2020 Clément Péron peron.clem@gmail.com
+/ {
- cpu_opp_table: cpu-opp-table {
compatible = "allwinner,sun50i-h6-operating-points";nvmem-cells = <&cpu_speed_grade>;opp-shared;opp@480000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <480000000>;opp-microvolt-speed0 = <880000 880000
1200000>;
opp-microvolt-speed1 = <820000 820000
1200000>;
opp-microvolt-speed2 = <820000 820000
1200000>;
};opp@720000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <720000000>;opp-microvolt-speed0 = <880000 880000
1200000>;
opp-microvolt-speed1 = <820000 820000
1200000>;
opp-microvolt-speed2 = <820000 820000
1200000>;
};opp@816000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <816000000>;opp-microvolt-speed0 = <880000 880000
1200000>;
opp-microvolt-speed1 = <820000 820000
1200000>;
opp-microvolt-speed2 = <820000 820000
1200000>;
};opp@888000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <888000000>;opp-microvolt-speed0 = <880000 880000
1200000>;
opp-microvolt-speed1 = <820000 820000
1200000>;
opp-microvolt-speed2 = <820000 820000
1200000>;
};opp@1080000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1080000000>;opp-microvolt-speed0 = <940000 940000
1200000>;
opp-microvolt-speed1 = <880000 880000
1200000>;
opp-microvolt-speed2 = <880000 880000
1200000>;
};opp@1320000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1320000000>;opp-microvolt-speed0 = <1000000 1000000
1200000>;
opp-microvolt-speed1 = <940000 940000
1200000>;
opp-microvolt-speed2 = <940000 940000
1200000>;
};opp@1488000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1488000000>;opp-microvolt-speed0 = <1060000 1060000
1200000>;
opp-microvolt-speed1 = <1000000 1000000
1200000>;
opp-microvolt-speed2 = <1000000 1000000
1200000>;
};opp@1608000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1608000000>;opp-microvolt-speed0 = <1090000 1090000
1200000>;
opp-microvolt-speed1 = <1030000 1030000
1200000>;
opp-microvolt-speed2 = <1030000 1030000
1200000>;
};opp@1704000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1704000000>;opp-microvolt-speed0 = <1120000 1120000
1200000>;
opp-microvolt-speed1 = <1060000 1060000
1200000>;
opp-microvolt-speed2 = <1060000 1060000
1200000>;
};opp@1800000000 {clock-latency-ns = <244144>; /* 8 32k
periods */
opp-hz = /bits/ 64 <1800000000>;opp-microvolt-speed0 = <1160000 1160000
1200000>;
opp-microvolt-speed1 = <1100000 1100000
1200000>;
opp-microvolt-speed2 = <1100000 1100000
1200000>;
};- };
+};
+&cpu0 {
- operating-points-v2 = <&cpu_opp_table>;
+};
+&cpu1 {
- operating-points-v2 = <&cpu_opp_table>;
+};
+&cpu2 {
- operating-points-v2 = <&cpu_opp_table>;
+};
+&cpu3 {
- operating-points-v2 = <&cpu_opp_table>;
+}; diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/arch/arm/dts/
sun50i-h6-orangepi-lite2.dts
index e098a2475f2d..e8770858b5d0 100644 --- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts +++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts @@ -1,11 +1,74 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/*
- Copyright (C) 2018 Jagan Teki jagan@openedev.com
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Jagan Teki jagan@openedev.com
#include "sun50i-h6-orangepi.dtsi"
/ { model = "OrangePi Lite2"; compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
- aliases {
serial1 = &uart1; /* BT-UART */- };
- wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";clocks = <&rtc 1>;clock-names = "ext_clock";reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */post-power-on-delay-ms = <200>;- };
+};
+&mmc1 {
- vmmc-supply = <®_cldo2>;
- vqmmc-supply = <®_bldo3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- brcm: sdio-wifi@1 {
reg = <1>;compatible = "brcm,bcm4329-fmac";interrupt-parent = <&r_pio>;interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0
*/
interrupt-names = "host-wake";- };
+};
+®_cldo2 {
- /*
* This regulator is connected with CLDO3.* Before the kernel can support synchronized* enable of coupled regulators, keep them* both always on as a ugly hack.*/- regulator-always-on;
+};
+®_cldo3 {
- /*
* This regulator is connected with CLDO2.* See the comments for CLDO2.*/- regulator-always-on;
+};
+/* There's the BT part of the AP6255 connected to that UART */ +&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- uart-has-rtscts;
- status = "okay";
- bluetooth {
compatible = "brcm,bcm4345c5";clocks = <&rtc 1>;clock-names = "lpo";device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /*
PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /*
PM1 */
shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4
*/
max-speed = <1500000>;- };
}; diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-
orangepi.dtsi
index 62e27948a3fa..ebc120a9232f 100644 --- a/arch/arm/dts/sun50i-h6-orangepi.dtsi +++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/*
- Copyright (C) 2018 Amarula Solutions
- Author: Jagan Teki jagan@amarulasolutions.com
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki jagan@amarulasolutions.com
/dts-v1/;
@@ -22,6 +20,25 @@ stdout-path = "serial0:115200n8"; };
- connector {
compatible = "hdmi-connector";type = "a";ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */port {hdmi_con_in: endpoint {remote-endpoint =
<&hdmi_out_con>;
};};- };
- ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <32768>;clock-output-names = "ext_osc32k";- };
- leds { compatible = "gpio-leds";
@@ -47,6 +64,10 @@ }; };
+&de {
- status = "okay";
+};
&ehci0 { status = "okay"; }; @@ -55,6 +76,21 @@ status = "okay"; };
+&gpu {
- mali-supply = <®_dcdcc>;
- status = "okay";
+};
+&hdmi {
- status = "okay";
+};
+&hdmi_out {
- hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;- };
+};
&mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -70,6 +106,12 @@ status = "okay"; };
+&pio {
- vcc-pc-supply = <®_bldo2>;
- vcc-pd-supply = <®_cldo1>;
- vcc-pg-supply = <®_aldo1>;
+};
&r_i2c { status = "okay";
@@ -163,6 +205,7 @@ };
reg_dcdcc: dcdcc {
regulator-enable-ramp-delay =
<32000>;
regulator-min-microvolt =
<810000>;
regulator-max-microvolt =
<1080000>;
regulator-name = "vdd-gpu";@@ -189,6 +232,18 @@ }; };
+&r_ir {
- status = "okay";
+};
+&r_pio {
- vcc-pm-supply = <®_bldo3>;
+};
+&rtc {
- clocks = <&ext_osc32k>;
+};
&uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; @@ -196,7 +251,12 @@ };
&usb2otg {
- dr_mode = "otg";
- /*
* OrangePi Lite 2 and One Plus, where this DT is used, don't* have a controllable VBUS even though they do have an ID pin.* Using it as anything but a USB host is unsafe.*/- dr_mode = "host"; status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-
pine-h64.dts
index 189834518391..961732c52aa0 100644 --- a/arch/arm/dts/sun50i-h6-pine-h64.dts +++ b/arch/arm/dts/sun50i-h6-pine-h64.dts @@ -1,30 +1,38 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/*
- Copyright (c) 2017 Icenowy Zheng icenowy@aosc.io
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng icenowy@aosc.io
/dts-v1/;
#include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64";
model = "Pine H64 model A"; compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases { ethernet0 = &emac; serial0 = &uart0;
spi0 = &spi0;};
chosen { stdout-path = "serial0:115200n8"; };
- connector {
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <32768>;clock-output-names = "ext_osc32k";};
hdmi_connector: connector { compatible = "hdmi-connector"; type = "a";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */port { hdmi_con_in: endpoint {
@@ -52,6 +60,16 @@ }; };
- reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";regulator-name = "vcc-gmac-3v3";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;startup-delay-us = <100000>;gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;enable-active-high;- };
- reg_usb_vbus: vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus";
@@ -63,25 +81,35 @@ }; };
+&cpu0 {
- cpu-supply = <®_dcdca>;
+};
+&de {
- status = "okay";
+};
+&ehci0 {
- status = "okay";
+};
+&ehci3 {
- status = "okay";
+};
&emac { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
- phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_aldo2>;
- phy-supply = <®_gmac_3v3>; allwinner,rx-delay-ps = <200>; allwinner,tx-delay-ps = <200>; status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";reg = <1>;- };
-};
-&de { +&gpu {
- mali-supply = <®_dcdcc>; status = "okay";
};
@@ -95,12 +123,11 @@ }; };
-&ehci0 {
- status = "okay";
-};
-&ehci3 {
- status = "okay";
+&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";reg = <1>;- };
};
&mmc0 { @@ -216,13 +243,16 @@ reg_dcdca: dcdca { regulator-always-on; regulator-min-microvolt =
<810000>;
regulator-max-microvolt =
<1080000>;
regulator-max-microvolt =
<1160000>;
regulator-ramp-delay = <2500>; regulator-name = "vdd-cpu"; }; reg_dcdcc: dcdcc {regulator-enable-ramp-delay =
<32000>;
regulator-min-microvolt =
<810000>;
regulator-max-microvolt =
<1080000>;
regulator-ramp-delay = <2500>; regulator-name = "vdd-gpu"; };@@ -255,10 +285,36 @@ }; };
+&r_ir {
- status = "okay";
+};
&r_pio { vcc-pm-supply = <®_aldo1>; };
+&rtc {
- clocks = <&ext_osc32k>;
+};
+/*
- The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
- flash and eMMC at the same time, as one of them would fail probing.
- Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
- fix this up in no eMMC is connected.
- */
+&spi0 {
- pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
- pinctrl-names = "default";
- status = "disabled";
- flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";reg = <0>;spi-max-frequency = <4000000>;- };
+};
&uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi index a117f479ae55..8a62a9fbe347 100644 --- a/arch/arm/dts/sun50i-h6.dtsi +++ b/arch/arm/dts/sun50i-h6.dtsi @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/*
- Copyright (C) 2017 Icenowy Zheng icenowy@aosc.io
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng icenowy@aosc.io
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> @@ -11,6 +9,7 @@ #include <dt-bindings/reset/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h>
/ { interrupt-parent = <&gic>; @@ -26,6 +25,9 @@ device_type = "cpu"; reg = <0>; enable-method = "psci";
clocks = <&ccu CLK_CPUX>;clock-latency-ns = <244144>; /* 8 32k
periods */
#cooling-cells = <2>;};
cpu1: cpu@1 {
@@ -33,6 +35,9 @@ device_type = "cpu"; reg = <1>; enable-method = "psci";
clocks = <&ccu CLK_CPUX>;clock-latency-ns = <244144>; /* 8 32k
periods */
#cooling-cells = <2>;};
cpu2: cpu@2 {
@@ -40,6 +45,9 @@ device_type = "cpu"; reg = <2>; enable-method = "psci";
clocks = <&ccu CLK_CPUX>;clock-latency-ns = <244144>; /* 8 32k
periods */
#cooling-cells = <2>;};
cpu3: cpu@3 {
@@ -47,6 +55,9 @@ device_type = "cpu"; reg = <3>; enable-method = "psci";
clocks = <&ccu CLK_CPUX>;clock-latency-ns = <244144>; /* 8 32k
periods */
#cooling-cells = <2>;@@ -56,14 +67,6 @@ status = "disabled"; };
- iosc: internal-osc-clk {
#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <16000000>;clock-accuracy = <300000000>;clock-output-names = "iosc";- };
- osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock";
@@ -71,11 +74,13 @@ clock-output-names = "osc24M"; };
- osc32k: osc32k_clk {
#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <32768>;clock-output-names = "osc32k";
pmu {
compatible = "arm,cortex-a53-pmu";interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;};
psci {
@@ -85,6 +90,7 @@
timer { compatible = "arm,armv8-timer";
arm,no-tick-in-suspend;
IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14@@ -130,6 +136,7 @@ clock-names = "bus", "mod"; resets = <&display_clocks
RST_MIXER0>;
iommus = <&iommu 0>; ports { #address-cells = <1>;@@ -155,6 +162,30 @@ resets = <&ccu RST_BUS_VE>; interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
iommus = <&iommu 3>;};gpu: gpu@1800000 {compatible = "allwinner,sun50i-h6-mali","arm,mali-t720";reg = <0x01800000 0x4000>;interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;clock-names = "core", "bus";resets = <&ccu RST_BUS_GPU>;status = "disabled";};crypto: crypto@1904000 {compatible = "allwinner,sun50i-h6-crypto";reg = <0x01904000 0x1000>;interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
<&ccu CLK_MBUS_CE>;
clock-names = "bus", "mod", "ram";resets = <&ccu RST_BUS_CE>;};
syscon: syscon@3000000 {
@@ -197,7 +228,7 @@ ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>;
clocks = <&osc24M>, <&osc32k>, <&iosc>;
clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>;@@ -215,9 +246,29 @@ #dma-cells = <1>; };
sid: sid@3006000 {
msgbox: mailbox@3003000 {compatible = "allwinner,sun50i-h6-msgbox","allwinner,sun6i-a31-
msgbox";
reg = <0x03003000 0x1000>;clocks = <&ccu CLK_BUS_MSGBOX>;resets = <&ccu RST_BUS_MSGBOX>;interrupts = <GIC_SPI 44
IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;};sid: efuse@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>;#address-cells = <1>;#size-cells = <1>;ths_calibration: thermal-sensor-
calibration@14 {
reg = <0x14 0x8>;};cpu_speed_grade: cpu-speed-grade@1c {reg = <0x1c 0x4>;};};
watchdog: watchdog@30090a0 {
@@ -225,10 +276,21 @@ "allwinner,sun6i-a31-wdt"; reg = <0x030090a0 0x20>; interrupts = <GIC_SPI 50
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>; /* Broken on some H6 boards */ status = "disabled";};
pwm: pwm@300a000 {compatible = "allwinner,sun50i-h6-pwm";reg = <0x0300a000 0x400>;clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;clock-names = "mod", "bus";resets = <&ccu RST_BUS_PWM>;#pwm-cells = <3>;status = "disabled";};pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>;
@@ -236,7 +298,7 @@ <GIC_SPI 53
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1>, <&osc24M>,
<&osc32k>;
clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc
0>;
clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>;@@ -256,6 +318,21 @@ function = "hdmi"; };
i2c0_pins: i2c0-pins {pins = "PD25", "PD26";function = "i2c0";};i2c1_pins: i2c1-pins {pins = "PH5", "PH6";function = "i2c1";};i2c2_pins: i2c2-pins {pins = "PD23", "PD24";function = "i2c2";};mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2",
"PF3",
"PF4", "PF5";@@ -264,10 +341,7 @@ bias-pull-up; };
/** /omit-if-no-ref/ isn't supported by U-
boot
* keep this comment to avoid bad sync with
Linux
*/
/omit-if-no-ref/ mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2",
"PG3",
"PG4", "PG5";@@ -285,10 +359,50 @@ bias-pull-up; };
/omit-if-no-ref/spi0_pins: spi0-pins {pins = "PC0", "PC2", "PC3";function = "spi0";};/* pin shared with MMC2-CMD (eMMC) *//omit-if-no-ref/spi0_cs_pin: spi0-cs-pin {pins = "PC5";function = "spi0";};/omit-if-no-ref/spi1_pins: spi1-pins {pins = "PH4", "PH5", "PH6";function = "spi1";};/omit-if-no-ref/spi1_cs_pin: spi1-cs-pin {pins = "PH3";function = "spi1";};spdif_tx_pin: spdif-tx-pin {pins = "PH7";function = "spdif";};uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; };uart1_pins: uart1-pins {pins = "PG6", "PG7";function = "uart1";};uart1_rts_cts_pins: uart1-rts-cts-pins {pins = "PG8", "PG9";function = "uart1";};};
gic: interrupt-controller@3021000 {
@@ -302,6 +416,15 @@ #interrupt-cells = <3>; };
iommu: iommu@30f0000 {compatible = "allwinner,sun50i-h6-iommu";reg = <0x030f0000 0x10000>;interrupts = <GIC_SPI 57
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_IOMMU>;resets = <&ccu RST_BUS_IOMMU>;#iommu-cells = <1>;};- mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc";
@@ -394,6 +517,78 @@ status = "disabled"; };
i2c0: i2c@5002000 {compatible = "allwinner,sun50i-h6-i2c","allwinner,sun6i-a31-i2c";reg = <0x05002000 0x400>;interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;resets = <&ccu RST_BUS_I2C0>;pinctrl-names = "default";pinctrl-0 = <&i2c0_pins>;status = "disabled";#address-cells = <1>;#size-cells = <0>;};i2c1: i2c@5002400 {compatible = "allwinner,sun50i-h6-i2c","allwinner,sun6i-a31-i2c";reg = <0x05002400 0x400>;interrupts = <GIC_SPI 5
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;resets = <&ccu RST_BUS_I2C1>;pinctrl-names = "default";pinctrl-0 = <&i2c1_pins>;status = "disabled";#address-cells = <1>;#size-cells = <0>;};i2c2: i2c@5002800 {compatible = "allwinner,sun50i-h6-i2c","allwinner,sun6i-a31-i2c";reg = <0x05002800 0x400>;interrupts = <GIC_SPI 6
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;resets = <&ccu RST_BUS_I2C2>;pinctrl-names = "default";pinctrl-0 = <&i2c2_pins>;status = "disabled";#address-cells = <1>;#size-cells = <0>;};spi0: spi@5010000 {compatible = "allwinner,sun50i-h6-spi","allwinner,sun8i-h3-spi";reg = <0x05010000 0x1000>;interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu
CLK_SPI0>;
clock-names = "ahb", "mod";dmas = <&dma 22>, <&dma 22>;dma-names = "rx", "tx";resets = <&ccu RST_BUS_SPI0>;status = "disabled";#address-cells = <1>;#size-cells = <0>;};spi1: spi@5011000 {compatible = "allwinner,sun50i-h6-spi","allwinner,sun8i-h3-spi";reg = <0x05011000 0x1000>;interrupts = <GIC_SPI 11
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu
CLK_SPI1>;
clock-names = "ahb", "mod";dmas = <&dma 23>, <&dma 23>;dma-names = "rx", "tx";resets = <&ccu RST_BUS_SPI1>;status = "disabled";#address-cells = <1>;#size-cells = <0>;};- emac: ethernet@5020000 { compatible = "allwinner,sun50i-h6-emac", "allwinner,sun50i-a64-emac";
@@ -414,6 +609,34 @@ }; };
i2s1: i2s@5091000 {#sound-dai-cells = <0>;compatible = "allwinner,sun50i-h6-i2s";reg = <0x05091000 0x1000>;interrupts = <GIC_SPI 19
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu
CLK_I2S1>;
clock-names = "apb", "mod";dmas = <&dma 4>, <&dma 4>;resets = <&ccu RST_BUS_I2S1>;dma-names = "rx", "tx";status = "disabled";};spdif: spdif@5093000 {#sound-dai-cells = <0>;compatible = "allwinner,sun50i-h6-spdif";reg = <0x05093000 0x400>;interrupts = <GIC_SPI 21
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu
CLK_SPDIF>;
clock-names = "apb", "spdif";resets = <&ccu RST_BUS_SPDIF>;dmas = <&dma 2>;dma-names = "tx";pinctrl-names = "default";pinctrl-0 = <&spdif_tx_pin>;status = "disabled";};- usb2otg: usb@5100000 { compatible = "allwinner,sun50i-h6-musb", "allwinner,sun8i-a33-musb";
@@ -470,6 +693,38 @@ status = "disabled"; };
dwc3: usb@5200000 {compatible = "snps,dwc3";reg = <0x05200000 0x10000>;interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_XHCI>,<&ccu CLK_BUS_XHCI>,<&rtc 0>;clock-names = "ref", "bus_early", "suspend";resets = <&ccu RST_BUS_XHCI>;/** The datasheet of the chip doesn't declare
the
* peripheral function, and there's no
boards known
* to have a USB Type-B port routed to the
port.
* In addition, no one has tested the
peripheral
* function yet.* So set the dr_mode to "host" in the DTSI
file.
*/dr_mode = "host";phys = <&usb3phy>;phy-names = "usb3-phy";status = "disabled";};usb3phy: phy@5210000 {compatible = "allwinner,sun50i-h6-usb3-phy";reg = <0x5210000 0x10000>;clocks = <&ccu CLK_USB_PHY1>;resets = <&ccu RST_USB_PHY1>;#phy-cells = <0>;status = "disabled";};- ehci3: usb@5311000 { compatible = "allwinner,sun50i-h6-ehci",
"generic-ehci";
reg = <0x05311000 0x100>;@@ -480,6 +735,7 @@ resets = <&ccu RST_BUS_OHCI3>, <&ccu RST_BUS_EHCI3>; phys = <&usb2phy 3>;
phy-names = "usb"; status = "disabled";@@ -491,6 +747,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_OHCI3>; phys = <&usb2phy 3>;
phy-names = "usb"; status = "disabled";@@ -507,7 +764,7 @@ resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu
RST_BUS_HDCP>;
reset-names = "ctrl", "hdcp"; phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled";@@ -549,7 +806,6 @@ "tcon-tv0"; clock-output-names = "tcon-top-tv0"; resets = <&ccu RST_BUS_TCON_TOP>;
reset-names = "rst"; #clock-cells = <1>; ports {@@ -636,10 +892,19 @@ }; };
rtc: rtc@7000000 {compatible = "allwinner,sun50i-h6-rtc";reg = <0x07000000 0x400>;interrupts = <GIC_SPI 101
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102
IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out",
"iosc";
#clock-cells = <1>;};- r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>;
clocks = <&osc24M>, <&osc32k>, <&iosc>,
clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-
periph";
#clock-cells = <1>;@@ -651,6 +916,7 @@ "allwinner,sun6i-a31-wdt"; reg = <0x07020400 0x20>; interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;};
r_intc: interrupt-controller@7021000 {
@@ -667,7 +933,7 @@ reg = <0x07022000 0x400>; interrupts = <GIC_SPI 105
IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
<&osc32k>;
clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
<&rtc 0>;
clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>;@@ -678,10 +944,30 @@ pins = "PL0", "PL1"; function = "s_i2c"; };
r_ir_rx_pin: r-ir-rx-pin {pins = "PL9";function = "s_cir_rx";};};r_ir: ir@7040000 {compatible = "allwinner,sun50i-
h6-ir",
"allwinner,sun6i-
a31-ir";
reg = <0x07040000 0x400>;interrupts = <GIC_SPI 109
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1_IR>,<&r_ccu CLK_IR>;clock-names = "apb", "ir";resets = <&r_ccu RST_R_APB1_IR>;pinctrl-names = "default";pinctrl-0 = <&r_ir_rx_pin>;status = "disabled";};
r_i2c: i2c@7081400 {
compatible = "allwinner,sun6i-a31-i2c";
compatible = "allwinner,sun50i-h6-i2c","allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 107
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;@@ -692,5 +978,55 @@ #address-cells = <1>; #size-cells = <0>; };
ths: thermal-sensor@5070400 {compatible = "allwinner,sun50i-h6-ths";reg = <0x05070400 0x100>;interrupts = <GIC_SPI 15
IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_THS>;clock-names = "bus";resets = <&ccu RST_BUS_THS>;nvmem-cells = <&ths_calibration>;nvmem-cell-names = "calibration";#thermal-sensor-cells = <1>;};- };
- thermal-zones {
cpu-thermal {polling-delay-passive = <0>;polling-delay = <0>;thermal-sensors = <&ths 0>;trips {cpu_alert: cpu-alert {temperature = <85000>;hysteresis = <2000>;type = "passive";};cpu-crit {temperature =
<100000>;
hysteresis = <0>;type = "critical";};};cooling-maps {map0 {trip = <&cpu_alert>;cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};};};gpu-thermal {polling-delay-passive = <0>;polling-delay = <0>;thermal-sensors = <&ths 1>;};};