Hello Group,

I am trying to put u-boot on my Embedded Planet Board EP8248 and it keeps looping in the initialization cycle:

U-Boot 1.1.2 (Dec 13 2004 - 21:11:34)
MPC8248 Reset Status: Check Stop, External Soft, External Hard
MPC8248 Clock Configuration
 - Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq  30-85 , Core Freq 100-300
 - dfbrg 1, corecnf 0x0e, busdf 3, cpmdf 1, plldf 0, pllmf 5
 - vco_out  396000000, scc_clk   99000000, brg_clk   24750000
 - cpu_clk  231000000, cpm_clk  198000000, bus_clk   66000000
 - pci_clk   66000000

CPU:   MPC8248 (HiP7 Rev 13, Mask 0.0 0K50M) at 231 MHz
Board: EP8248E 1.0 CPLD revision 2
I2C:   ready
DRAM:  128 M

U-Boot 1.1.2 (Dec 13 2004 - 21:11:34)

MPC8248 Reset Status: Check Stop, External Soft, External Hard

MPC8248 Clock Configuration
......

Could you make some suggestions?  I thought U-boot has been successfully ported to EP8248 board.  My board has 128Mbyte SDRAM and 64MB of flash.

Thanks,

Nguyen