Problem is still same. You must change one parameter in /net/tftp.c Broadcast is defined with MAC address ff:ff:ff:ff:ff:ff, but now is defined as 00:00:00:00:00:00. Change one line (at the end of file). old: memset(NetServerEther, 0x0, 6); new: memset(NetServerEther, 0xff, 6);
And send me echo.
Michal Simek Czech Technical University
My board use RTL8019,when i use tftp ,there are some problems. when start tftp，my hyperterminal always display "Loading: T T T T T T T T T T T T T T T T T T T T" the whole information as follows：
U-Boot 1.1.4_XT (Jun 6 2006 - 17:36:18) U-Boot code: 0C300000 -> 0C31AD70 BSS: -> 0C31EF98 RAM Configuration: Bank #0: 0c000000 8 MB Bank #1: 0c800000 8 MB Flash: 2 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 XT=> help tftp tftpboot [loadAddress] [bootfilename] XT=> tftpboot 0x0c700000 image.bin TFTP from server 192.168.0.23; our IP address is 192.168.0.70 Filename 'image.bin'. Load address: 0xc700000 Loading: T T T T T T T T T T T T T T T T T T T T Retry count exceeded; starting again TFTP from server 192.168.0.23; our IP address is 192.168.0.70
would someone give me some suggestions?
thank u !
xt
060607
您 想 拥 有 abc@188.com 邮 箱 吗 ？ 创 纪 录 16G 超 大 容 量（送 6G 免 费 网 盘），最 高 性 价 比 的 电 子 邮 件 解 决 之 道