[U-Boot-Users] Bogus External Interrupt

Hello,

I am trying to write simple program similar to examples/timer.c, which uses interrupts from general purpose timers.

My board is based on mpc8260 and I am using U-boot 1.1.4.

When interrupt is generated from timer, there also appears message: Bogus External Interrupt IRQ 0.

I don't know why bogus interrupt appears and how it is related to my timer interrupt.This is also strange that the number of IRQ is 0. This bogus interrupt appears only when timer is started. When I have registered my timer interrupt handler with irq_install_handler, but not started timer, everything was ok, and I was able to check with irqinfo that my handler is registered.

I would be grateful for some suggestions what can be wrong.

Best regards!