Re: [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification

Hi Simon,

I've dug into DriverModel documentation and even created a PoC for existing avb commands. The problem is that (maybe I missed out some key concepts) I'm still not sure if it makes sense to follow it driver mode in the context of AVB 2.0 feature and what kind of extra devices can be used within the same uclass in this case? Could you please explain in detail. Thanks

Hi Sam, Thanks, will fix!

On 3 May 2018 at 05:31, Simon Glass sjg@chromium.org wrote:

Hi Igor,

On 25 April 2018 at 07:18, Igor Opaniuk igor.opaniuk@linaro.org wrote:

...

Enable a "avb" command to execute Android Verified Boot 2.0 operations. It includes such subcommands: avb init - initialize avb2 subsystem avb read_rb - read rollback index avb write_rb - write rollback index avb is_unlocked - check device lock state avb get_uuid - read and print uuid of a partition avb read_part - read data from partition avb read_part_hex - read data from partition and output to stdout avb write_part - write data to partition avb verify - run full verification chain

Signed-off-by: Igor Opaniuk igor.opaniuk@linaro.org

cmd/Kconfig | 15 +++ cmd/Makefile | 3 + cmd/avb.c | 351 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 369 insertions(+) create mode 100644 cmd/avb.c

diff --git a/cmd/Kconfig b/cmd/Kconfig index bc1d2f3..96695ff 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1675,6 +1675,21 @@ config CMD_TRACE for analsys (e.g. using bootchart). See doc/README.trace for full details.

+config CMD_AVB

•   bool "avb - Android Verified Boot 2.0 operations"
  

•   depends on LIBAVB_AB
  

•   help
  

•     Enables a "avb" command to perform verification of partitions using
  

•     Android Verified Boot 2.0 functionality. It includes such subcommands:
  

•       avb init - initialize avb2 subsystem
  

•       avb read_rb - read rollback index
  

•       avb write_rb - write rollback index
  

•       avb is_unlocked - check device lock state
  

•       avb get_uuid - read and print uuid of a partition
  

•       avb read_part - read data from partition
  

•       avb read_part_hex - read data from partition and output to stdout
  

•       avb write_part - write data to partition
  

•       avb verify - run full verification chain
  

endmenu

config CMD_UBI diff --git a/cmd/Makefile b/cmd/Makefile index c4269ac..bbf6c2a 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -151,6 +151,9 @@ obj-$(CONFIG_CMD_REGULATOR) += regulator.o

obj-$(CONFIG_CMD_BLOB) += blob.o

+# Android Verified Boot 2.0 +obj-$(CONFIG_CMD_AVB) += avb.o

obj-$(CONFIG_X86) += x86/ endif # !CONFIG_SPL_BUILD

diff --git a/cmd/avb.c b/cmd/avb.c new file mode 100644 index 0000000..d040906 --- /dev/null +++ b/cmd/avb.c @@ -0,0 +1,351 @@

+/*

• • (C) Copyright 2018, Linaro Limited
• • SPDX-License-Identifier: GPL-2.0+
• */

+#include <avb_verify.h> +#include <command.h> +#include <image.h> +#include <malloc.h> +#include <mmc.h>

+#define AVB_BOOTARGS "avb_bootargs" +static struct AvbOps *avb_ops;

+static const char * const requested_partitions[] = {"boot",

•                                        "system",
  

•                                        "vendor",
  

•                                        NULL};
  

+int do_avb_init(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{

•   unsigned long mmc_dev;
  

•   if (argc != 2)
  

•           return CMD_RET_USAGE;
  

•   mmc_dev = simple_strtoul(argv[1], NULL, 16);
  

•   if (avb_ops)
  

•           avb_ops_free(avb_ops);
  

•   avb_ops = avb_ops_alloc(mmc_dev);
  

•   if (avb_ops)
  

•           return CMD_RET_SUCCESS;
  

•   return CMD_RET_FAILURE;
  

+}

+int do_avb_read_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{

•   const char *part;
  

•   s64 offset;
  

•   size_t bytes, bytes_read = 0;
  

•   void *buffer;
  

•   if (!avb_ops) {
  

•           printf("AVB 2.0 is not initialized, please run 'avb init'\n");
  

•           return CMD_RET_USAGE;
  

•   }
  

•   if (argc != 5)
  

•           return CMD_RET_USAGE;
  

•   part = argv[1];
  

•   offset = simple_strtoul(argv[2], NULL, 16);
  

•   bytes = simple_strtoul(argv[3], NULL, 16);
  

•   buffer = (void *)simple_strtoul(argv[4], NULL, 16);
  

•   if (avb_ops->read_from_partition(avb_ops, part, offset, bytes,
  

•                                    buffer, &bytes_read) ==
  

•                                    AVB_IO_RESULT_OK) {
  

Please can you make sure this uses driver model, and put wrappers for these function calls in the uclass?

Regards, Simon