Hi,
On 12/04/2013 11:58 AM, Tomi Valkeinen wrote:
On 2013-12-02 15:47, Roger Quadros wrote:
Hi,
This series
- Fixes OMAP4 Panda USB device detection issues
- Gets rid of ULPI reset errors on Beagle & Panda
cheers, -roger
Roger Quadros (3): usb: ehci-omap: Reset the USB Host OMAP module omap3_beagle: Don't use ulpi_reset omap4_panda: Don't use ulpi_reset
drivers/usb/host/ehci-omap.c | 57 +++++++++++++++++++++++++++++++----------- include/configs/omap3_beagle.h | 3 --- include/configs/omap4_panda.h | 3 --- 3 files changed, 42 insertions(+), 21 deletions(-)
Tested on OMAP4 Panda and OMAP3 Beagle xM.
Usually seems to work, but on Panda I still sometimes see that the eth is not found:
(Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found No ethernet found.
Thanks for the tests. I'll need to investigate more, but the patches are good enough to go as they are.
cheers, -roger