This driver includes some test features such as only supporting certain bus speeds. It passes its I2C traffic through to an emulator.
Acked-by: Heiko Schocher hs@denx.de Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v5: None Changes in v4: - Drop set_offset_len() method
Changes in v3: - Update for new uclass <=> driver interface
Changes in v2: None
drivers/i2c/Makefile | 2 +- drivers/i2c/sandbox_i2c.c | 129 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 130 insertions(+), 1 deletion(-) create mode 100644 drivers/i2c/sandbox_i2c.c
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 5a93473..6f3c86c 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o -obj-$(CONFIG_SYS_I2C_SANDBOX) += i2c-emul-uclass.o +obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o diff --git a/drivers/i2c/sandbox_i2c.c b/drivers/i2c/sandbox_i2c.c new file mode 100644 index 0000000..c07308e --- /dev/null +++ b/drivers/i2c/sandbox_i2c.c @@ -0,0 +1,129 @@ +/* + * Simulate an I2C port + * + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <i2c.h> +#include <asm/test.h> +#include <dm/lists.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct dm_sandbox_i2c_emul_priv { + struct udevice *emul; +}; + +static int get_emul(struct udevice *bus, uint chip_addr, struct udevice **devp, + struct dm_i2c_ops **opsp) +{ + const void *blob = gd->fdt_blob; + struct dm_i2c_chip *priv; + struct udevice *dev; + int ret; + + *devp = NULL; + *opsp = NULL; + ret = i2c_get_chip(bus, chip_addr, &dev); + if (ret) + return ret; + priv = dev_get_parentdata(dev); + if (!priv->emul) { + int node; + + debug("Scanning i2c bus '%s' for devices\n", dev->name); + for (node = fdt_first_subnode(blob, dev->of_offset); + node >= 0; + node = fdt_next_subnode(blob, node)) { + int ret; + + ret = lists_bind_fdt(dev, blob, node, &priv->emul); + if (ret) + return ret; + debug("Found emul '%s' for i2c device '%s'\n", + priv->emul->name, dev->name); + break; + } + } + + if (!priv->emul) + return -ENODEV; + ret = device_probe(priv->emul); + if (ret) + return ret; + *devp = priv->emul; + *opsp = i2c_get_ops(priv->emul); + + return 0; +} + +static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, + int nmsgs) +{ + struct dm_i2c_bus *i2c = bus->uclass_priv; + struct dm_i2c_ops *ops; + struct udevice *emul, *dev; + bool is_read; + int ret; + + /* Special test code to return success but with no emulation */ + if (msg->addr == SANDBOX_I2C_TEST_ADDR) + return 0; + + ret = get_emul(bus, msg->addr, &emul, &ops); + if (ret) + return ret; + + /* For testing, require an offset length of 1 */ + ret = i2c_get_chip(bus, msg->addr, &dev); + if (ret) + return ret; + + /* + * For testing, don't allow writing above 100KHz for writes and + * 400KHz for reads + */ + is_read = nmsgs > 1; + if (i2c->speed_hz > (is_read ? 400000 : 100000)) + return -EINVAL; + return ops->xfer(emul, msg, nmsgs); +} + +static const struct dm_i2c_ops sandbox_i2c_ops = { + .xfer = sandbox_i2c_xfer, +}; + +static int sandbox_i2c_child_pre_probe(struct udevice *dev) +{ + struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev); + + /* Ignore our test address */ + if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR) + return 0; + if (dev->of_offset == -1) + return 0; + + return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, + i2c_chip); +} + +static const struct udevice_id sandbox_i2c_ids[] = { + { .compatible = "sandbox,i2c" }, + { } +}; + +U_BOOT_DRIVER(i2c_sandbox) = { + .name = "i2c_sandbox", + .id = UCLASS_I2C, + .of_match = sandbox_i2c_ids, + .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip), + .child_pre_probe = sandbox_i2c_child_pre_probe, + .ops = &sandbox_i2c_ops, +};