Hi Stefano,
Le 12/02/2012 17:06, Stefano Babic a écrit :
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:
arm, davinci: Add support for the Calimain board from OMICRON electronics (2012-02-12 10:11:33 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master
Eric Nelson (6): mx6q: define GPIO macros for translating between ordinals and port:index mxc_spi: move machine specifics into CPU headers mx6q: Add support for ECSPI through mxc_spi driver mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Fabio Estevam (7): mx53loco: Use gpio_direction_input prior to gpio_get_value mx53ard: Use gpio_direction_input prior to gpio_get_value mx53evk: Use gpio_direction_input prior to gpio_get_value mx53smd: Use gpio_direction_input prior to gpio_get_value mx51evk: Use gpio_direction_input prior to gpio_get_value mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected mx35pdk: Remove duplicate CPU revision and reset cause information
Marek Vasut (2): i.MX28: Fix VDDIO and VDDA setup MX28: Fix get_timer() / get_tbclk() issue
Matthias Fuchs (4): mx28evk: add RTC support mx28evk: add USB support mx28evk: add SPI support mx28: fix SPL code to make USB booting work
Shawn Guo (1): common/image.c: align usage of fdt_high with initrd_high
Stefano Babic (4): MX35: add missing get_ticks() and get_tbclk() MX31: add missing get_tbclk() MX5/MX6: add missing get_ticks() and get_tbclk() MX27: add missing get_tbclk()
README | 8 ++ arch/arm/cpu/arm1136/mx31/timer.c | 9 ++ arch/arm/cpu/arm1136/mx35/generic.c | 2 +- arch/arm/cpu/arm1136/mx35/timer.c | 103 +++++++++++++++--------- arch/arm/cpu/arm926ejs/mx27/timer.c | 5 + arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +++- arch/arm/cpu/arm926ejs/mx28/start.S | 21 +++++- arch/arm/cpu/arm926ejs/mx28/timer.c | 19 ++++- arch/arm/cpu/armv7/imx-common/timer.c | 75 ++++++++++++++----- arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +++++++ arch/arm/include/asm/arch-mx35/imx-regs.h | 25 ++++++ arch/arm/include/asm/arch-mx5/imx-regs.h | 30 +++++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 48 ++++++++++++ board/freescale/mx28evk/iomux.c | 8 ++ board/freescale/mx28evk/mx28evk.c | 7 ++ board/freescale/mx35pdk/mx35pdk.c | 27 +------ board/freescale/mx51evk/mx51evk.c | 2 + board/freescale/mx53ard/mx53ard.c | 2 + board/freescale/mx53evk/mx53evk.c | 2 + board/freescale/mx53loco/mx53loco.c | 2 + board/freescale/mx53smd/mx53smd.c | 1 + board/freescale/mx6qsabrelite/imximage.cfg | 2 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 ++++++ common/image.c | 12 +-- drivers/spi/mxc_spi.c | 93 ++--------------------- include/configs/mx28evk.h | 64 +++++++++++++++- include/configs/mx6qsabrelite.h | 29 ++++++- 27 files changed, 472 insertions(+), 192 deletions(-)
Best regards, Stefano
Applied to u-boot-arm/master, thanks!
(that's not on u-boot/master yet though, as my pull request was sent out before this one)
Amicalement,