16 Jan
2013
16 Jan
'13
12:24 p.m.
On 16/01/2013 11:49, Sarvesh Gupta wrote:
Dear All,
I have added the USB host controller driver into our Mx53 loco board's u-boot and also made some changes in mx53_loco.h and mx53_loco.c.
Below is the complete log what I am getting on serial console:
U-Boot 2009.08-dirty (Jan 15 2013 - 12:32:20) CPU: Freescale i.MX53 family 2.1V at 800 MHz mx53 pll1: 800MHz mx53 pll2: 400MHz mx53 pll3: 216MHz mx53 pll4: 455MHz
This ML is intended for U-Boot mainline. However, you are using a version provided and modified by the manufacturer. Ask your support for this, or use u-boot mainline (v2013.01) to post your questions on this mailing list.
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================