From: Igor Prusov IVPrusov@sberdevices.ru
Add A1 SPIFC driver from Linux. Slightly modified to use u-boot driver framework and accommodate to lack of ioread32_rep/iowrite32_rep.
Based on Linux version 6.6-rc4
Signed-off-by: Igor Prusov IVPrusov@sberdevices.ru Signed-off-by: Martin Kurbanov mmkurbanov@sberdevices.ru --- drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/meson_spifc_a1.c | 384 +++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 drivers/spi/meson_spifc_a1.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 854b8b88da..dedb366370 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -251,6 +251,14 @@ config MICROCHIP_COREQSPI Enable the QSPI driver for Microchip FPGA QSPI controllers. This driver can be used on Polarfire SoC.
+config MESON_SPIFC_A1 + bool "Amlogic Meson A1 SPI Flash Controller driver" + depends on ARCH_MESON + help + Enable the Amlogic A1 SPI Flash Controller (SPIFC) driver. + This driver can be used to access the SPI NOR/NAND flash chips on + Amlogic A1 SoC. + config MPC8XX_SPI bool "MPC8XX SPI Driver" depends on MPC8xx diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c27b3327c3..14bdb97f18 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_IPROC_QSPI) += iproc_qspi.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o +obj-$(CONFIG_MESON_SPIFC_A1) += meson_spifc_a1.o obj-$(CONFIG_MICROCHIP_COREQSPI) += microchip_coreqspi.o obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/meson_spifc_a1.c b/drivers/spi/meson_spifc_a1.c new file mode 100644 index 0000000000..4b840c4634 --- /dev/null +++ b/drivers/spi/meson_spifc_a1.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Amlogic A1 SPI flash controller (SPIFC) + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * + * Author: Martin Kurbanov mmkurbanov@sberdevices.ru + * + * Ported to u-boot: + * Author: Igor Prusov ivprusov@sberdevices.ru + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <spi.h> +#include <spi-mem.h> +#include <asm/io.h> +#include <linux/log2.h> +#include <linux/iopoll.h> +#include <linux/bitfield.h> + +#define SPIFC_A1_AHB_CTRL_REG 0x0 +#define SPIFC_A1_AHB_BUS_EN BIT(31) + +#define SPIFC_A1_USER_CTRL0_REG 0x200 +#define SPIFC_A1_USER_REQUEST_ENABLE BIT(31) +#define SPIFC_A1_USER_REQUEST_FINISH BIT(30) +#define SPIFC_A1_USER_DATA_UPDATED BIT(0) + +#define SPIFC_A1_USER_CTRL1_REG 0x204 +#define SPIFC_A1_USER_CMD_ENABLE BIT(30) +#define SPIFC_A1_USER_CMD_MODE GENMASK(29, 28) +#define SPIFC_A1_USER_CMD_CODE GENMASK(27, 20) +#define SPIFC_A1_USER_ADDR_ENABLE BIT(19) +#define SPIFC_A1_USER_ADDR_MODE GENMASK(18, 17) +#define SPIFC_A1_USER_ADDR_BYTES GENMASK(16, 15) +#define SPIFC_A1_USER_DOUT_ENABLE BIT(14) +#define SPIFC_A1_USER_DOUT_MODE GENMASK(11, 10) +#define SPIFC_A1_USER_DOUT_BYTES GENMASK(9, 0) + +#define SPIFC_A1_USER_CTRL2_REG 0x208 +#define SPIFC_A1_USER_DUMMY_ENABLE BIT(31) +#define SPIFC_A1_USER_DUMMY_MODE GENMASK(30, 29) +#define SPIFC_A1_USER_DUMMY_CLK_SYCLES GENMASK(28, 23) + +#define SPIFC_A1_USER_CTRL3_REG 0x20c +#define SPIFC_A1_USER_DIN_ENABLE BIT(31) +#define SPIFC_A1_USER_DIN_MODE GENMASK(28, 27) +#define SPIFC_A1_USER_DIN_BYTES GENMASK(25, 16) + +#define SPIFC_A1_USER_ADDR_REG 0x210 + +#define SPIFC_A1_AHB_REQ_CTRL_REG 0x214 +#define SPIFC_A1_AHB_REQ_ENABLE BIT(31) + +#define SPIFC_A1_ACTIMING0_REG (0x0088 << 2) +#define SPIFC_A1_TSLCH GENMASK(31, 30) +#define SPIFC_A1_TCLSH GENMASK(29, 28) +#define SPIFC_A1_TSHWL GENMASK(20, 16) +#define SPIFC_A1_TSHSL2 GENMASK(15, 12) +#define SPIFC_A1_TSHSL1 GENMASK(11, 8) +#define SPIFC_A1_TWHSL GENMASK(7, 0) + +#define SPIFC_A1_DBUF_CTRL_REG 0x240 +#define SPIFC_A1_DBUF_DIR BIT(31) +#define SPIFC_A1_DBUF_AUTO_UPDATE_ADDR BIT(30) +#define SPIFC_A1_DBUF_ADDR GENMASK(7, 0) + +#define SPIFC_A1_DBUF_DATA_REG 0x244 + +#define SPIFC_A1_USER_DBUF_ADDR_REG 0x248 + +#define SPIFC_A1_BUFFER_SIZE 512U + +#define SPIFC_A1_MAX_HZ 200000000 +#define SPIFC_A1_MIN_HZ 1000000 + +#define SPIFC_A1_USER_CMD(op) ( \ + SPIFC_A1_USER_CMD_ENABLE | \ + FIELD_PREP(SPIFC_A1_USER_CMD_CODE, (op)->cmd.opcode) | \ + FIELD_PREP(SPIFC_A1_USER_CMD_MODE, ilog2((op)->cmd.buswidth))) + +#define SPIFC_A1_USER_ADDR(op) ( \ + SPIFC_A1_USER_ADDR_ENABLE | \ + FIELD_PREP(SPIFC_A1_USER_ADDR_MODE, ilog2((op)->addr.buswidth)) | \ + FIELD_PREP(SPIFC_A1_USER_ADDR_BYTES, (op)->addr.nbytes - 1)) + +#define SPIFC_A1_USER_DUMMY(op) ( \ + SPIFC_A1_USER_DUMMY_ENABLE | \ + FIELD_PREP(SPIFC_A1_USER_DUMMY_MODE, ilog2((op)->dummy.buswidth)) | \ + FIELD_PREP(SPIFC_A1_USER_DUMMY_CLK_SYCLES, (op)->dummy.nbytes << 3)) + +#define SPIFC_A1_TSLCH_VAL FIELD_PREP(SPIFC_A1_TSLCH, 1) +#define SPIFC_A1_TCLSH_VAL FIELD_PREP(SPIFC_A1_TCLSH, 1) +#define SPIFC_A1_TSHWL_VAL FIELD_PREP(SPIFC_A1_TSHWL, 7) +#define SPIFC_A1_TSHSL2_VAL FIELD_PREP(SPIFC_A1_TSHSL2, 7) +#define SPIFC_A1_TSHSL1_VAL FIELD_PREP(SPIFC_A1_TSHSL1, 7) +#define SPIFC_A1_TWHSL_VAL FIELD_PREP(SPIFC_A1_TWHSL, 2) +#define SPIFC_A1_ACTIMING0_VAL (SPIFC_A1_TSLCH_VAL | SPIFC_A1_TCLSH_VAL | \ + SPIFC_A1_TSHWL_VAL | SPIFC_A1_TSHSL2_VAL | \ + SPIFC_A1_TSHSL1_VAL | SPIFC_A1_TWHSL_VAL) + +struct amlogic_spifc_a1 { + struct spi_controller *ctrl; + struct clk clk; + struct device *dev; + void __iomem *base; + u32 curr_speed_hz; +}; + +static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read) +{ + u32 mask = SPIFC_A1_USER_REQUEST_FINISH | + (read ? SPIFC_A1_USER_DATA_UPDATED : 0); + u32 val; + + writel(SPIFC_A1_USER_REQUEST_ENABLE, + spifc->base + SPIFC_A1_USER_CTRL0_REG); + + return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG, + val, (val & mask) == mask, + 200 * 1000); +} + +static void amlogic_spifc_a1_drain_buffer(struct amlogic_spifc_a1 *spifc, + char *buf, u32 len) +{ + u32 data; + const u32 count = len / sizeof(data); + const u32 pad = len % sizeof(data); + + writel(SPIFC_A1_DBUF_AUTO_UPDATE_ADDR, + spifc->base + SPIFC_A1_DBUF_CTRL_REG); + readsl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count); + + if (pad) { + data = readl(spifc->base + SPIFC_A1_DBUF_DATA_REG); + memcpy(buf + len - pad, &data, pad); + } +} + +static void amlogic_spifc_a1_fill_buffer(struct amlogic_spifc_a1 *spifc, + const char *buf, u32 len) +{ + u32 data; + const u32 count = len / sizeof(data); + const u32 pad = len % sizeof(data); + + writel(SPIFC_A1_DBUF_DIR | SPIFC_A1_DBUF_AUTO_UPDATE_ADDR, + spifc->base + SPIFC_A1_DBUF_CTRL_REG); + writesl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count); + + if (pad) { + memcpy(&data, buf + len - pad, pad); + writel(data, spifc->base + SPIFC_A1_DBUF_DATA_REG); + } +} + +static void amlogic_spifc_a1_user_init(struct amlogic_spifc_a1 *spifc) +{ + writel(0, spifc->base + SPIFC_A1_USER_CTRL0_REG); + writel(0, spifc->base + SPIFC_A1_USER_CTRL1_REG); + writel(0, spifc->base + SPIFC_A1_USER_CTRL2_REG); + writel(0, spifc->base + SPIFC_A1_USER_CTRL3_REG); +} + +static void amlogic_spifc_a1_set_cmd(struct amlogic_spifc_a1 *spifc, + u32 cmd_cfg) +{ + u32 val; + + val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG); + val &= ~(SPIFC_A1_USER_CMD_MODE | SPIFC_A1_USER_CMD_CODE); + val |= cmd_cfg; + writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG); +} + +static void amlogic_spifc_a1_set_addr(struct amlogic_spifc_a1 *spifc, u32 addr, + u32 addr_cfg) +{ + u32 val; + + writel(addr, spifc->base + SPIFC_A1_USER_ADDR_REG); + + val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG); + val &= ~(SPIFC_A1_USER_ADDR_MODE | SPIFC_A1_USER_ADDR_BYTES); + val |= addr_cfg; + writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG); +} + +static void amlogic_spifc_a1_set_dummy(struct amlogic_spifc_a1 *spifc, + u32 dummy_cfg) +{ + u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL2_REG); + + val &= ~(SPIFC_A1_USER_DUMMY_MODE | SPIFC_A1_USER_DUMMY_CLK_SYCLES); + val |= dummy_cfg; + writel(val, spifc->base + SPIFC_A1_USER_CTRL2_REG); +} + +static int amlogic_spifc_a1_read(struct amlogic_spifc_a1 *spifc, void *buf, + u32 size, u32 mode) +{ + u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL3_REG); + int ret; + + val &= ~(SPIFC_A1_USER_DIN_MODE | SPIFC_A1_USER_DIN_BYTES); + val |= SPIFC_A1_USER_DIN_ENABLE; + val |= FIELD_PREP(SPIFC_A1_USER_DIN_MODE, mode); + val |= FIELD_PREP(SPIFC_A1_USER_DIN_BYTES, size); + writel(val, spifc->base + SPIFC_A1_USER_CTRL3_REG); + + ret = amlogic_spifc_a1_request(spifc, true); + if (!ret) + amlogic_spifc_a1_drain_buffer(spifc, buf, size); + + return ret; +} + +static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc, + const void *buf, u32 size, u32 mode) +{ + u32 val; + + amlogic_spifc_a1_fill_buffer(spifc, buf, size); + + val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG); + val &= ~(SPIFC_A1_USER_DOUT_MODE | SPIFC_A1_USER_DOUT_BYTES); + val |= FIELD_PREP(SPIFC_A1_USER_DOUT_MODE, mode); + val |= FIELD_PREP(SPIFC_A1_USER_DOUT_BYTES, size); + val |= SPIFC_A1_USER_DOUT_ENABLE; + writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG); + + return amlogic_spifc_a1_request(spifc, false); +} + +static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq) +{ + int ret; + + if (freq == spifc->curr_speed_hz) + return 0; + + ret = clk_set_rate(&spifc->clk, freq); + if (ret) + return ret; + + spifc->curr_speed_hz = freq; + return 0; +} + +static int amlogic_spifc_a1_exec_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct amlogic_spifc_a1 *spifc = dev_get_priv(slave->dev->parent); + size_t data_size = op->data.nbytes; + int ret; + + ret = amlogic_spifc_a1_set_freq(spifc, slave->max_hz); + if (ret) + return ret; + + amlogic_spifc_a1_user_init(spifc); + amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op)); + + if (op->addr.nbytes) + amlogic_spifc_a1_set_addr(spifc, op->addr.val, + SPIFC_A1_USER_ADDR(op)); + + if (op->dummy.nbytes) + amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op)); + + if (data_size) { + u32 mode = ilog2(op->data.buswidth); + + writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG); + + if (op->data.dir == SPI_MEM_DATA_IN) + ret = amlogic_spifc_a1_read(spifc, op->data.buf.in, + data_size, mode); + else + ret = amlogic_spifc_a1_write(spifc, op->data.buf.out, + data_size, mode); + } else { + ret = amlogic_spifc_a1_request(spifc, false); + } + + return ret; +} + +static int amlogic_spifc_a1_adjust_op_size(struct spi_slave *slave, + struct spi_mem_op *op) +{ + op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE); + return 0; +} + +static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc) +{ + u32 regv; + + regv = readl(spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG); + regv &= ~(SPIFC_A1_AHB_REQ_ENABLE); + writel(regv, spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG); + + regv = readl(spifc->base + SPIFC_A1_AHB_CTRL_REG); + regv &= ~(SPIFC_A1_AHB_BUS_EN); + writel(regv, spifc->base + SPIFC_A1_AHB_CTRL_REG); + + writel(SPIFC_A1_ACTIMING0_VAL, spifc->base + SPIFC_A1_ACTIMING0_REG); + + writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG); +} + +static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = { + .exec_op = amlogic_spifc_a1_exec_op, + .adjust_op_size = amlogic_spifc_a1_adjust_op_size, +}; + +static int amlogic_spifc_a1_probe(struct udevice *dev) +{ + struct amlogic_spifc_a1 *spifc = dev_get_priv(dev); + int ret; + struct udevice *bus = dev; + + spifc->base = (void *)dev_read_addr(dev); + + ret = clk_get_by_index(bus, 0, &spifc->clk); + if (ret) { + pr_err("can't get clk spifc_gate!\n"); + return ret; + } + + ret = clk_enable(&spifc->clk); + if (ret) { + pr_err("enable clk fail\n"); + return ret; + } + + amlogic_spifc_a1_hw_init(spifc); + + return 0; +} + +static int amlogic_spifc_a1_remove(struct udevice *dev) +{ + struct amlogic_spifc_a1 *spifc = dev_get_priv(dev); + + clk_free(&spifc->clk); + + return 0; +} + +static const struct udevice_id meson_spifc_ids[] = { + { .compatible = "amlogic,a1-spifc", }, + { } +}; + +int amlogic_spifc_a1_set_speed(struct udevice *bus, uint hz) +{ + return 0; +} + +int amlogic_spifc_a1_set_mode(struct udevice *bus, uint mode) +{ + return 0; +} + +static const struct dm_spi_ops amlogic_spifc_a1_ops = { + .mem_ops = &amlogic_spifc_a1_mem_ops, + .set_speed = amlogic_spifc_a1_set_speed, + .set_mode = amlogic_spifc_a1_set_mode, +}; + +U_BOOT_DRIVER(meson_spifc_a1) = { + .name = "meson_spifc_a1", + .id = UCLASS_SPI, + .of_match = meson_spifc_ids, + .ops = &amlogic_spifc_a1_ops, + .probe = amlogic_spifc_a1_probe, + .remove = amlogic_spifc_a1_remove, + .priv_auto = sizeof(struct amlogic_spifc_a1), +};