Hi Serkey,
On 18 August 2015 at 06:26, Sergey Temerkhanov s.temerkhanov@gmail.com wrote:
On some systems, UART initialization is performed before running U-Boot. This commit allows to skip UART re-initializaion on those systems
Signed-off-by: Sergey Temerkhanov s.temerkhanov@gmail.com Signed-off-by: Radha Mohan Chintakuntla rchintakuntla@cavium.com
Changes in v4:
- Fixed build warnings
- Moved to DM_SERIAL
Changes in v3:
- Added __used keyword
Changes in v2: None
drivers/serial/serial_pl01x.c | 12 ++++++------ include/dm/platform_data/serial_pl01x.h | 6 ++++++ 2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index ad503af..037fd23 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -125,7 +125,7 @@ static int pl011_set_line_control(struct pl01x_regs *regs) }
static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
int clock, int baudrate)
int clock, int baudrate){ switch (type) { case TYPE_PL010: { @@ -295,7 +295,6 @@ __weak struct serial_device *default_serial_console(void) #endif /* nCONFIG_DM_SERIAL */
#ifdef CONFIG_DM_SERIAL
struct pl01x_priv { struct pl01x_regs *regs; enum pl01x_type type; @@ -306,9 +305,9 @@ static int pl01x_serial_setbrg(struct udevice *dev, int baudrate) struct pl01x_serial_platdata *plat = dev_get_platdata(dev); struct pl01x_priv *priv = dev_get_priv(dev);
pl01x_generic_setbrg(priv->regs, priv->type, plat->clock, baudrate);return 0;
return (plat->flags & PL0x_PREINITIALIZED) ? 0 :pl01x_generic_setbrg(priv->regs, priv->type,plat->clock, baudrate);}
static int pl01x_serial_probe(struct udevice *dev) @@ -318,7 +317,8 @@ static int pl01x_serial_probe(struct udevice *dev)
priv->regs = (struct pl01x_regs *)plat->base; priv->type = plat->type;
return pl01x_generic_serial_init(priv->regs, priv->type);
return (plat->flags & PL0x_PREINITIALIZED) ? 0 :pl01x_generic_serial_init(priv->regs, priv->type);}
static int pl01x_serial_getc(struct udevice *dev) diff --git a/include/dm/platform_data/serial_pl01x.h b/include/dm/platform_data/serial_pl01x.h index 5e068f3..455121b 100644 --- a/include/dm/platform_data/serial_pl01x.h +++ b/include/dm/platform_data/serial_pl01x.h @@ -11,17 +11,23 @@ enum pl01x_type { TYPE_PL011, };
+enum pl01x_flags {
PL0x_PREINITIALIZED = 1 << 0, /* Skip port initialization */+};
/* *Information about a serial port
- @base: Register base address
- @type: Port type
- @clock: Input clock rate, used for calculating the baud rate divisor
*/
- @flags: Port flags
struct pl01x_serial_platdata { unsigned long base; enum pl01x_type type; unsigned int clock;
unsigned long flags;};
#endif
This patch is fine as far as it goes (although the x in PL0x_PREINITIALIZED should be capitalised to match style I think).
But why doesn't this board use device tree (CONFIG_OF_CONTROL)? Do you have a device tree file for it?
Regards, Simon