Added bindings specification for bitbanged gpio driver for Dallas one wire protocol
Signed-off-by: Eugen Hristev eugen.hristev@microchip.com --- doc/device-tree-bindings/w1/w1-gpio.txt | 40 +++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 040000 doc/device-tree-bindings/w1 create mode 100644 doc/device-tree-bindings/w1/w1-gpio.txt
diff --git a/doc/device-tree-bindings/w1/w1-gpio.txt b/doc/device-tree-bindings/w1/w1-gpio.txt new file mode 100644 index 0000000..5a58244 --- /dev/null +++ b/doc/device-tree-bindings/w1/w1-gpio.txt @@ -0,0 +1,40 @@ +W1 gpio device binding - one wire protocol over bitbanged gpio +======================= + + +Child nodes are required in device tree. The driver will detect +the devices serial number and then search in the child nodes in the device tree +for the proper node and try to match it with the device. + +Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers + +Driver: +- drivers/w1/w1-gpio.c + +Software w1 device-tree node properties: +Required: +* compatible = "w1-gpio"; +* gpios = <...>; + This is the gpio used for one wire protocol, using bitbanging + +Optional: +* none + +Example: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&pioA 32 0>; +}; + +Example with child: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&pioA 32 0>; + + eeprom1: eeprom@0 { + compatible = "maxim,ds24xxx"; + } +}; +