Hi,
i try to boot the congatec board with u-boot.2014.04-rc1 from sd-card.
The Thread: http://lists.denx.de/pipermail/u-boot/2013-May/154298.html was my guide.
My Steps are:
export CROSS_COMPILE=arm-cortexa9-linux-gnueabi- (the OSELAS 2012 toolchain) export ARCH=arm
cd u-boot2014.04-rc1 make cgtqmx6qeval_config -> Configuring for cgtqmx6qeval - Board: cgtqmx6eval, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
make u-boot.imx ... -> Image Type: Freescale IMX Boot Image -> Image Ver: 2 (i.MX53/6 compatible) -> Data Size: 200704 Bytes = 196.00 kB = 0.19 MB -> Load Address: 177ff420 -> Entry Point: 17800000
Then copy u-boot to the sd-card: dd if=u-boot.imx of=/dev/sdb bs=512 seek=2
When the congatec board starts with conga u-boot from spi nor flash i type: conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850 conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000 conga-QMX6 U-Boot > md 0x20d8040 020d8040: 00003850 10000000 00000000 00000000 P8.............. 020d8050: 00000000 00000000 00000000 00000000 ................ conga-QMX6 U-Boot > reset resetting ...
and nothing is happened...
What can i do to find error?
(For the freescale i.mx6 sabresd board i have already compiled the u-boot and it works fine.)
Greetings from Lüneburg Alexander Hänel