This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Stefano Babic sbabic@denx.de Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx6/Kconfig | 6 - board/sks-kinkel/sksimx6/Kconfig | 11 - board/sks-kinkel/sksimx6/MAINTAINERS | 6 - board/sks-kinkel/sksimx6/Makefile | 2 - board/sks-kinkel/sksimx6/sksimx6.c | 431 --------------------------- configs/sksimx6_defconfig | 53 ---- include/configs/sksimx6.h | 85 ------ 7 files changed, 594 deletions(-) delete mode 100644 board/sks-kinkel/sksimx6/Kconfig delete mode 100644 board/sks-kinkel/sksimx6/MAINTAINERS delete mode 100644 board/sks-kinkel/sksimx6/Makefile delete mode 100644 board/sks-kinkel/sksimx6/sksimx6.c delete mode 100644 configs/sksimx6_defconfig delete mode 100644 include/configs/sksimx6.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index b0923ef76edb..b4c2be67bced 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -514,11 +514,6 @@ config TARGET_PCL063_ULL select DM_THERMAL select SUPPORT_SPL
-config TARGET_SKSIMX6 - bool "sks-imx6" - depends on MX6QDL - select SUPPORT_SPL - config TARGET_SOMLABS_VISIONSOM_6ULL bool "visionsom-6ull" depends on MX6ULL @@ -636,7 +631,6 @@ source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig" source "board/liebherr/mccmon6/Kconfig" source "board/logicpd/imx6/Kconfig" -source "board/sks-kinkel/sksimx6/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/somlabs/visionsom-6ull/Kconfig" source "board/technexion/pico-imx6/Kconfig" diff --git a/board/sks-kinkel/sksimx6/Kconfig b/board/sks-kinkel/sksimx6/Kconfig deleted file mode 100644 index 3efdf9d8b2a0..000000000000 --- a/board/sks-kinkel/sksimx6/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if TARGET_SKSIMX6 - -config SYS_BOARD - default "sksimx6" - -config SYS_VENDOR - default "sks-kinkel" - -config SYS_CONFIG_NAME - default "sksimx6" -endif diff --git a/board/sks-kinkel/sksimx6/MAINTAINERS b/board/sks-kinkel/sksimx6/MAINTAINERS deleted file mode 100644 index c1527bfa5f3f..000000000000 --- a/board/sks-kinkel/sksimx6/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SKS-Kinkel sksimx6 -M: Stefano Babic sbabic@denx.de -S: Maintained -F: board/sks-kinkel/sksimx6/ -F: include/configs/sksimx6.h -F: configs/sksimx6_defconfig diff --git a/board/sks-kinkel/sksimx6/Makefile b/board/sks-kinkel/sksimx6/Makefile deleted file mode 100644 index 1828fadd4e83..000000000000 --- a/board/sks-kinkel/sksimx6/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# -obj-y := sksimx6.o diff --git a/board/sks-kinkel/sksimx6/sksimx6.c b/board/sks-kinkel/sksimx6/sksimx6.c deleted file mode 100644 index cec3ade96cfd..000000000000 --- a/board/sks-kinkel/sksimx6/sksimx6.c +++ /dev/null @@ -1,431 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016 Stefano Babic sbabic@denx.de - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <net.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <asm/global_data.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/video.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <asm/arch/crm_regs.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> -#include <spl.h> -#include <netdev.h> -#include <miiphy.h> -#include <micrel.h> - -#include <common.h> -#include <malloc.h> -#include <fuse.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart1_pads[] = { - IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const gpios_pads[] = { - IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const usdhc2_pads[] = { - IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */ -}; - -static iomux_v3_cfg_t const enet_pads[] = { - IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -iomux_v3_cfg_t const enet_pads1[] = { - /* pin 35 - 1 (PHY_AD2) on reset */ - IOMUX_PADS(PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 32 - 1 - (MODE0) all */ - IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 31 - 1 - (MODE1) all */ - IOMUX_PADS(PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 28 - 1 - (MODE2) all */ - IOMUX_PADS(PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 27 - 1 - (MODE3) all */ - IOMUX_PADS(PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ - IOMUX_PADS(PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* pin 42 PHY nRST */ - IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - -static int mx6_rgmii_rework(struct phy_device *phydev) -{ - - /* min rx data delay */ - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - /* min tx data delay */ - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - /* max rx/tx clock delay, min rx/tx control */ - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - mx6_rgmii_rework(phydev); - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} - -#define ENET_NRST IMX_GPIO_NR(1, 25) - -void setup_iomux_enet(void) -{ - SETUP_IOMUX_PADS(enet_pads); - -} - -int board_eth_init(struct bd_info *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret; - - setup_iomux_enet(); - - bus = fec_get_miibus(base, -1); - if (!bus) - return -EINVAL; - /* scan phy */ - phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR), - PHY_INTERFACE_MODE_RGMII); - - if (!phydev) { - ret = -EINVAL; - goto free_bus; - } - ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) - goto free_phydev; - - return 0; - -free_phydev: - free(phydev); -free_bus: - free(bus); - return ret; -} - -int board_early_init_f(void) -{ - SETUP_IOMUX_PADS(uart1_pads); - - return 0; -} - -int board_init(void) -{ - /* Address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - /* Take in reset the ATMega processor */ - SETUP_IOMUX_PADS(gpios_pads); - gpio_direction_output(IMX_GPIO_NR(5, 4), 0); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC2_BASE_ADDR, 0}, -}; - -#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 0) -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - if (cfg->esdhc_base == USDHC2_BASE_ADDR) - ret = 1; - - return ret; -} - -int board_mmc_init(struct bd_info *bis) -{ - int ret; - - SETUP_IOMUX_PADS(usdhc2_pads); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - usdhc_cfg[0].max_bus_width = 4; - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); - if (ret) { - printf("Warning: failed to initialize mmc dev \n"); - return ret; - } - - return 0; -} - -#if defined(CONFIG_SPL_BUILD) -#include <asm/arch/mx6-ddr.h> - -/* - * Driving strength: - * 0x30 == 40 Ohm - * 0x28 == 48 Ohm - */ -#define IMX6SDL_DRIVE_STRENGTH 0x230 - - -/* configure MX6SOLO/DUALLITE mmdc DDR io registers */ -struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { - .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH, - .dram_cas = IMX6SDL_DRIVE_STRENGTH, - .dram_ras = IMX6SDL_DRIVE_STRENGTH, - .dram_reset = IMX6SDL_DRIVE_STRENGTH, - .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH, - .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH, - .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH, -}; - -/* configure MX6SOLO/DUALLITE mmdc GRP io registers */ -struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { - .grp_ddr_type = 0x000c0000, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_addds = IMX6SDL_DRIVE_STRENGTH, - .grp_ctlds = IMX6SDL_DRIVE_STRENGTH, - .grp_ddrmode = 0x00020000, - .grp_b0ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b1ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b2ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b3ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b4ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b5ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b6ds = IMX6SDL_DRIVE_STRENGTH, - .grp_b7ds = IMX6SDL_DRIVE_STRENGTH, -}; - -/* MT41K128M16JT-125 */ -static struct mx6_ddr3_cfg mt41k128m16jt_125 = { - /* quad = 1066, duallite = 800 */ - .mem_speed = 1066, - .density = 2, - .width = 16, - .banks = 8, - .rowaddr = 14, - .coladdr = 10, - .pagesz = 2, - .trcd = 1375, - .trcmin = 4875, - .trasmin = 3500, - .SRT = 0, -}; - -static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = { - .p0_mpwldectrl0 = 0x0043004E, - .p0_mpwldectrl1 = 0x003D003F, - .p1_mpwldectrl0 = 0x00230021, - .p1_mpwldectrl1 = 0x0028003E, - .p0_mpdgctrl0 = 0x42580250, - .p0_mpdgctrl1 = 0x0238023C, - .p1_mpdgctrl0 = 0x422C0238, - .p1_mpdgctrl1 = 0x02180228, - .p0_mprddlctl = 0x44464A46, - .p1_mprddlctl = 0x44464A42, - .p0_mpwrdlctl = 0x36343236, - .p1_mpwrdlctl = 0x36343230, -}; - -/* DDR 64bit 1GB */ -static struct mx6_ddr_sysinfo mem_qdl = { - .dsize = 2, - .cs1_mirror = 0, - /* config for full 4GB range so that get_mem_size() works */ - .cs_density = 32, - .ncs = 1, - .bi_on = 1, - .rtt_nom = 1, - .rtt_wr = 1, - .ralat = 5, - .walat = 0, - .mif3_mode = 3, - .rst_to_cke = 0x23, - .sde_to_rst = 0x10, - .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ -}; - -static void ccgr_init(void) -{ - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - /* set the default clock gate to save power */ - writel(0x00C03F3F, &ccm->CCGR0); - writel(0x0030FC03, &ccm->CCGR1); - writel(0x0FFFC000, &ccm->CCGR2); - writel(0x3FF00000, &ccm->CCGR3); - writel(0x00FFF300, &ccm->CCGR4); - writel(0xFFFFFFFF, &ccm->CCGR5); - writel(0x000003FF, &ccm->CCGR6); -} - -static void spl_dram_init(void) -{ - if (is_cpu_type(MXC_CPU_MX6DL)) { - mt41k128m16jt_125.mem_speed = 800; - mem_qdl.rtt_nom = 1; - mem_qdl.rtt_wr = 1; - - mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); - mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125); - } else { - printf("Wrong CPU for this board\n"); - return; - } - - udelay(100); - -#ifdef CONFIG_MX6_DDRCAL - - /* Perform DDR DRAM calibration */ - mmdc_do_write_level_calibration(&mem_qdl); - mmdc_do_dqs_calibration(&mem_qdl); -#endif -} - -static void check_bootcfg(void) -{ - u32 val5, val6; - - fuse_sense(0, 5, &val5); - fuse_sense(0, 6, &val6); - /* Check if boot from MMC */ - if (val6 & 0x10) { - puts("BT_FUSE_SEL already fused, will do nothing\n"); - return; - } - fuse_prog(0, 5, 0x00000840); - /* BT_FUSE_SEL */ - fuse_prog(0, 6, 0x00000010); - - do_reset(NULL, 0, 0, NULL); -} - -void board_init_f(ulong dummy) -{ - ccgr_init(); - - /* setup AIPS and disable watchdog */ - arch_cpu_init(); - - gpr_init(); - - /* iomux */ - board_early_init_f(); - - /* setup GP timer */ - timer_init(); - - /* UART clocks enabled and gd valid - init serial console */ - preloader_console_init(); - - /* DDR initialization */ - spl_dram_init(); - - /* Set fuses for new boards and reboot if not set */ - check_bootcfg(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* load/boot image from boot device */ - board_init_r(NULL, 0); -} -#endif diff --git a/configs/sksimx6_defconfig b/configs/sksimx6_defconfig deleted file mode 100644 index 9b3706124ffa..000000000000 --- a/configs/sksimx6_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_MX6QDL=y -CONFIG_MX6_DDRCAL=y -CONFIG_TARGET_SKSIMX6=y -CONFIG_SPL_TEXT_BASE=0x00908000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x64000 -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" -CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SILENT_CONSOLE=y -CONFIG_SILENT_U_BOOT_ONLY=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_DM=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_PHY_MICREL_KSZ8XXX=y -CONFIG_FEC_MXC=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_DM_THERMAL=y -CONFIG_IMX_THERMAL=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sksimx6.h b/include/configs/sksimx6.h deleted file mode 100644 index 7052d8049e4b..000000000000 --- a/include/configs/sksimx6.h +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Stefano Babic sbabic@denx.de - */ - - -#ifndef __SKSIMX6_CONFIG_H -#define __SKSIMX6_CONFIG_H - -#include "mx6_common.h" -#include "imx6_spl.h" - -/* Serial */ -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) - -/* Ethernet */ -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0x01 - -#define CONFIG_PHY_MICREL_KSZ9021 - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C2 -#define CONFIG_SYS_I2C_SPEED 100000 - -/* Filesystem support */ - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 1 - -/* Environment organization */ - -/* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \ - "bootcmd=run mmcboot\0" \ - "bootfile=uImage\0" \ - "bootimage=uImage\0" \ - "console=ttymxc0\0" \ - "fdt_addr_r=0x18000000\0" \ - "fdt_file=imx6dl-sks-cts.dtb\0" \ - "fdt_high=0xffffffff\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "miscargs=quiet\0" \ - "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \ - "mmcboot=if run mmcload;then " \ - "run mmcargs addcons addmisc;" \ - "bootm;fi\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p1\0" \ - "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \ - "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \ - "run nfsargs addip addcons addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs " \ - "nfsroot=${serverip}:${nfsroot},v3 panic=1\0" - -#endif