From: Michal Simek monstr@monstr.eu
Signed-off-by: Michal Simek monstr@monstr.eu --- MAINTAINERS | 2 +- MAKEALL | 6 +- Makefile | 5 +- board/xilinx/microblaze-generic/Makefile | 50 ++++ board/xilinx/microblaze-generic/config.mk | 32 +++ .../xilinx/microblaze-generic/microblaze-generic.c | 69 +++++ board/xilinx/microblaze-generic/u-boot.lds | 68 +++++ board/xilinx/microblaze-generic/xparameters.h | 69 +++++ board/xilinx/ml401/Makefile | 50 ---- board/xilinx/ml401/config.mk | 32 --- board/xilinx/ml401/ml401.c | 69 ----- board/xilinx/ml401/u-boot.lds | 68 ----- board/xilinx/ml401/xparameters.h | 69 ----- include/configs/microblaze-generic.h | 280 +++++++++++++++++++ include/configs/ml401.h | 281 -------------------- 15 files changed, 574 insertions(+), 576 deletions(-) create mode 100644 board/xilinx/microblaze-generic/Makefile create mode 100644 board/xilinx/microblaze-generic/config.mk create mode 100644 board/xilinx/microblaze-generic/microblaze-generic.c create mode 100644 board/xilinx/microblaze-generic/u-boot.lds create mode 100644 board/xilinx/microblaze-generic/xparameters.h delete mode 100644 board/xilinx/ml401/Makefile delete mode 100644 board/xilinx/ml401/config.mk delete mode 100644 board/xilinx/ml401/ml401.c delete mode 100644 board/xilinx/ml401/u-boot.lds delete mode 100644 board/xilinx/ml401/xparameters.h create mode 100644 include/configs/microblaze-generic.h delete mode 100644 include/configs/ml401.h
diff --git a/MAINTAINERS b/MAINTAINERS index 60def0c..dfe54a7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -707,7 +707,7 @@ Yasushi Shoji yashi@atmark-techno.com
Michal Simek monstr@monstr.eu
- ML401 MicroBlaze + microblaze-generic MicroBlaze
######################################################################### # Coldfire Systems: # diff --git a/MAKEALL b/MAKEALL index 5ce3f31..f6271a2 100755 --- a/MAKEALL +++ b/MAKEALL @@ -697,9 +697,9 @@ LIST_nios2=" \ ## MicroBlaze Systems #########################################################################
-LIST_microblaze=" \ - ml401 \ - suzaku \ +LIST_microblaze=" \ + microblaze-generic \ + suzaku \ "
######################################################################### diff --git a/Makefile b/Makefile index c532e5b..1432e6d 100644 --- a/Makefile +++ b/Makefile @@ -3149,10 +3149,9 @@ PCI5441_config : unconfig ## Microblaze #========================================================================
-ml401_config: unconfig +microblaze-generic_config: unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_ML401 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
suzaku_config: unconfig @mkdir -p $(obj)include diff --git a/board/xilinx/microblaze-generic/Makefile b/board/xilinx/microblaze-generic/Makefile new file mode 100644 index 0000000..10b47b2 --- /dev/null +++ b/board/xilinx/microblaze-generic/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk new file mode 100644 index 0000000..c75daaf --- /dev/null +++ b/board/xilinx/microblaze-generic/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 Michal Simek +# +# Michal SIMEK monstr@monstr.eu +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# CAUTION: This file is automatically generated by libgen. +# Version: Xilinx EDK 6.3 EDK_Gmm.12.3 +# + +TEXT_BASE = 0x29000000 + +PLATFORM_CPPFLAGS += -mno-xl-soft-mul +PLATFORM_CPPFLAGS += -mno-xl-soft-div +PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c new file mode 100644 index 0000000..f388b77 --- /dev/null +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK monstr@monstr.eu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This is a board specific file. It's OK to include board specific + * header files */ + +#include <common.h> +#include <config.h> +#include <asm/microblaze_intc.h> +#include <asm/asm.h> + +void do_reset (void) +{ +#ifdef CONFIG_SYS_GPIO_0 + *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = + ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR))); +#endif +#ifdef CONFIG_SYS_RESET_ADDRESS + puts ("Reseting board\n"); + asm ("bra r0"); +#endif +} + +int gpio_init (void) +{ +#ifdef CONFIG_SYS_GPIO_0 + *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF; +#endif + return 0; +} + +#ifdef CONFIG_SYS_FSL_2 +void fsl_isr2 (void *arg) { + volatile int num; + *((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) = + ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4))); + GET (num, 2); + NGET (num, 2); + puts("*"); +} + +void fsl_init2 (void) { + puts("fsl_init2\n"); + install_interrupt_handler (FSL_INTR_2,\ + fsl_isr2,\ + NULL); +} +#endif diff --git a/board/xilinx/microblaze-generic/u-boot.lds b/board/xilinx/microblaze-generic/u-boot.lds new file mode 100644 index 0000000..b38f648 --- /dev/null +++ b/board/xilinx/microblaze-generic/u-boot.lds @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2004 Atmark Techno, Inc. + * + * Yasushi SHOJI yashi@atmark-techno.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(microblaze) +ENTRY(_start) + +SECTIONS +{ + .text ALIGN(0x4): + { + __text_start = .; + cpu/microblaze/start.o (.text) + *(.text) + __text_end = .; + } + + .rodata ALIGN(0x4): + { + __rodata_start = .; + *(.rodata) + __rodata_end = .; + } + + .data ALIGN(0x4): + { + __data_start = .; + *(.data) + __data_end = .; + } + + .u_boot_cmd ALIGN(0x4): + { + . = .; + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + .bss ALIGN(0x4): + { + __bss_start = .; + *(.bss) + . = ALIGN(4); + __bss_end = .; + } + __end = . ; +} diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h new file mode 100644 index 0000000..d805061 --- /dev/null +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK monstr@monstr.eu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 + */ + +/* System Clock Frequency */ +#define XILINX_CLOCK_FREQ 100000000 + +/* Microblaze is microblaze_0 */ +#define XILINX_USE_MSR_INSTR 1 +#define XILINX_FSL_NUMBER 3 + +/* Interrupt controller is opb_intc_0 */ +#define XILINX_INTC_BASEADDR 0x41200000 +#define XILINX_INTC_NUM_INTR_INPUTS 6 + +/* Timer pheriphery is opb_timer_1 */ +#define XILINX_TIMER_BASEADDR 0x41c00000 +#define XILINX_TIMER_IRQ 0 + +/* Uart pheriphery is RS232_Uart */ +#define XILINX_UARTLITE_BASEADDR 0x40600000 +#define XILINX_UARTLITE_BAUDRATE 115200 + +/* IIC pheriphery is IIC_EEPROM */ +#define XILINX_IIC_0_BASEADDR 0x40800000 +#define XILINX_IIC_0_FREQ 100000 +#define XILINX_IIC_0_BIT 0 + +/* GPIO is LEDs_4Bit*/ +#define XILINX_GPIO_BASEADDR 0x40000000 + +/* Flash Memory is FLASH_2Mx32 */ +#define XILINX_FLASH_START 0x2c000000 +#define XILINX_FLASH_SIZE 0x00800000 + +/* Main Memory is DDR_SDRAM_64Mx32 */ +#define XILINX_RAM_START 0x28000000 +#define XILINX_RAM_SIZE 0x04000000 + +/* Sysace Controller is SysACE_CompactFlash */ +#define XILINX_SYSACE_BASEADDR 0x41800000 +#define XILINX_SYSACE_HIGHADDR 0x4180ffff +#define XILINX_SYSACE_MEM_WIDTH 16 + +/* Ethernet controller is Ethernet_MAC */ +#define XILINX_EMACLITE_BASEADDR 0x40C00000 diff --git a/board/xilinx/ml401/Makefile b/board/xilinx/ml401/Makefile deleted file mode 100644 index 10b47b2..0000000 --- a/board/xilinx/ml401/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $^ - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/ml401/config.mk deleted file mode 100644 index c75daaf..0000000 --- a/board/xilinx/ml401/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2007 Michal Simek -# -# Michal SIMEK monstr@monstr.eu -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# CAUTION: This file is automatically generated by libgen. -# Version: Xilinx EDK 6.3 EDK_Gmm.12.3 -# - -TEXT_BASE = 0x29000000 - -PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mno-xl-soft-div -PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c deleted file mode 100644 index f388b77..0000000 --- a/board/xilinx/ml401/ml401.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK monstr@monstr.eu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This is a board specific file. It's OK to include board specific - * header files */ - -#include <common.h> -#include <config.h> -#include <asm/microblaze_intc.h> -#include <asm/asm.h> - -void do_reset (void) -{ -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = - ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR))); -#endif -#ifdef CONFIG_SYS_RESET_ADDRESS - puts ("Reseting board\n"); - asm ("bra r0"); -#endif -} - -int gpio_init (void) -{ -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF; -#endif - return 0; -} - -#ifdef CONFIG_SYS_FSL_2 -void fsl_isr2 (void *arg) { - volatile int num; - *((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) = - ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4))); - GET (num, 2); - NGET (num, 2); - puts("*"); -} - -void fsl_init2 (void) { - puts("fsl_init2\n"); - install_interrupt_handler (FSL_INTR_2,\ - fsl_isr2,\ - NULL); -} -#endif diff --git a/board/xilinx/ml401/u-boot.lds b/board/xilinx/ml401/u-boot.lds deleted file mode 100644 index b38f648..0000000 --- a/board/xilinx/ml401/u-boot.lds +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI yashi@atmark-techno.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(microblaze) -ENTRY(_start) - -SECTIONS -{ - .text ALIGN(0x4): - { - __text_start = .; - cpu/microblaze/start.o (.text) - *(.text) - __text_end = .; - } - - .rodata ALIGN(0x4): - { - __rodata_start = .; - *(.rodata) - __rodata_end = .; - } - - .data ALIGN(0x4): - { - __data_start = .; - *(.data) - __data_end = .; - } - - .u_boot_cmd ALIGN(0x4): - { - . = .; - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; - } - - .bss ALIGN(0x4): - { - __bss_start = .; - *(.bss) - . = ALIGN(4); - __bss_end = .; - } - __end = . ; -} diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h deleted file mode 100644 index d805061..0000000 --- a/board/xilinx/ml401/xparameters.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK monstr@monstr.eu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 - */ - -/* System Clock Frequency */ -#define XILINX_CLOCK_FREQ 100000000 - -/* Microblaze is microblaze_0 */ -#define XILINX_USE_MSR_INSTR 1 -#define XILINX_FSL_NUMBER 3 - -/* Interrupt controller is opb_intc_0 */ -#define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 6 - -/* Timer pheriphery is opb_timer_1 */ -#define XILINX_TIMER_BASEADDR 0x41c00000 -#define XILINX_TIMER_IRQ 0 - -/* Uart pheriphery is RS232_Uart */ -#define XILINX_UARTLITE_BASEADDR 0x40600000 -#define XILINX_UARTLITE_BAUDRATE 115200 - -/* IIC pheriphery is IIC_EEPROM */ -#define XILINX_IIC_0_BASEADDR 0x40800000 -#define XILINX_IIC_0_FREQ 100000 -#define XILINX_IIC_0_BIT 0 - -/* GPIO is LEDs_4Bit*/ -#define XILINX_GPIO_BASEADDR 0x40000000 - -/* Flash Memory is FLASH_2Mx32 */ -#define XILINX_FLASH_START 0x2c000000 -#define XILINX_FLASH_SIZE 0x00800000 - -/* Main Memory is DDR_SDRAM_64Mx32 */ -#define XILINX_RAM_START 0x28000000 -#define XILINX_RAM_SIZE 0x04000000 - -/* Sysace Controller is SysACE_CompactFlash */ -#define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff -#define XILINX_SYSACE_MEM_WIDTH 16 - -/* Ethernet controller is Ethernet_MAC */ -#define XILINX_EMACLITE_BASEADDR 0x40C00000 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h new file mode 100644 index 0000000..ed4bf6d --- /dev/null +++ b/include/configs/microblaze-generic.h @@ -0,0 +1,280 @@ +/* + * (C) Copyright 2007-2008 Michal Simek + * + * Michal SIMEK monstr@monstr.eu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/microblaze-generic/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 + +/* uart */ +#ifdef XILINX_UARTLITE_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#elif XILINX_UART16550_BASEADDR +#define CONFIG_SYS_NS16550 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) +#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ +#define CONFIG_BAUDRATE 115200 + +/* The following table includes the supported baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} +#else +#error Undefined uart +#endif + +/* setting reset address */ +/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/ + +/* ethernet */ +#ifdef XILINX_EMAC_BASEADDR +#define CONFIG_XILINX_EMAC 1 +#define CONFIG_SYS_ENET +#else +#ifdef XILINX_EMACLITE_BASEADDR +#define CONFIG_XILINX_EMACLITE 1 +#define CONFIG_SYS_ENET +#endif +#endif +#undef ET_DEBUG + +/* gpio */ +#ifdef XILINX_GPIO_BASEADDR +#define CONFIG_SYS_GPIO_0 1 +#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR +#endif + +/* interrupt controller */ +#ifdef XILINX_INTC_BASEADDR +#define CONFIG_SYS_INTC_0 1 +#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS +#endif + +/* timer */ +#ifdef XILINX_TIMER_BASEADDR +#if (XILINX_TIMER_IRQ != -1) +#define CONFIG_SYS_TIMER_0 1 +#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#endif +#else +#ifdef XILINX_CLOCK_FREQ +#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ +#else +#error BAD CLOCK FREQ +#endif +#endif +/* FSL */ +/* #define CONFIG_SYS_FSL_2 */ +/* #define FSL_INTR_2 1 */ + +/* + * memory layout - Example + * TEXT_BASE = 0x1200_0000; + * CONFIG_SYS_SRAM_BASE = 0x1000_0000; + * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; + * + * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 + * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 + * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 + * + * 0x1000_0000 CONFIG_SYS_SDRAM_BASE + * FREE + * 0x1200_0000 TEXT_BASE + * U-BOOT code + * 0x1202_0000 + * FREE + * + * STACK + * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START +#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ +/* start of global data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + +/* monitor code */ +#define SIZE 0x40000 +#define CONFIG_SYS_MONITOR_LEN SIZE +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MALLOC_LEN SIZE +#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) + +/* stack */ +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MONITOR_BASE + +/*#define RAMENV */ +#define FLASH + +#ifdef FLASH + #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START + #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE + #define CONFIG_SYS_FLASH_CFI 1 + #define CONFIG_FLASH_CFI_DRIVER 1 + #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ + #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ + #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ + + #ifdef RAMENV + #define CONFIG_ENV_IS_NOWHERE 1 + #define CONFIG_ENV_SIZE 0x1000 + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) + + #else /* !RAMENV */ + #define CONFIG_ENV_IS_IN_FLASH 1 + #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) + #define CONFIG_ENV_SIZE 0x40000 + #endif /* !RAMBOOT */ +#else /* !FLASH */ + /* ENV in RAM */ + #define CONFIG_SYS_NO_FLASH 1 + #define CONFIG_ENV_IS_NOWHERE 1 + #define CONFIG_ENV_SIZE 0x1000 + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) + #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ +#endif /* !FLASH */ + +/* system ace */ +#ifdef XILINX_SYSACE_BASEADDR + #define CONFIG_SYSTEMACE + /* #define DEBUG_SYSTEMACE */ + #define SYSTEMACE_CONFIG_FPGA + #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR + #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH + #define CONFIG_DOS_PARTITION +#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MFSL + +#ifndef CONFIG_SYS_ENET + #undef CONFIG_CMD_NET +#else + #define CONFIG_CMD_PING +#endif + +#if defined(CONFIG_SYSTEMACE) + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT +#endif + +#if defined(FLASH) + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_FLASH + #define CONFIG_CMD_IMLS + #define CONFIG_CMD_JFFS2 + + #if !defined(RAMENV) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVES + #endif +#else + #undef CONFIG_CMD_FLASH +#endif + +#if defined(CONFIG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" + +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "U-Boot-mONStR> " +#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ +#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CONFIG_SYS_USR_EXCEP /* user exception */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + +#define CONFIG_CMDLINE_EDITING + +#endif /* __CONFIG_H */ diff --git a/include/configs/ml401.h b/include/configs/ml401.h deleted file mode 100644 index c802dcb..0000000 --- a/include/configs/ml401.h +++ /dev/null @@ -1,281 +0,0 @@ -/* - * (C) Copyright 2007-2008 Michal Simek - * - * Michal SIMEK monstr@monstr.eu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "../board/xilinx/ml401/xparameters.h" - -#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ -#define MICROBLAZE_V5 1 -#define CONFIG_ML401 1 /* ML401 Board */ - -/* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#elif XILINX_UART16550_BASEADDR -#define CONFIG_SYS_NS16550 1 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) -#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#else -#error Undefined uart -#endif - -/* setting reset address */ -/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/ - -/* ethernet */ -#ifdef XILINX_EMAC_BASEADDR -#define CONFIG_XILINX_EMAC 1 -#define CONFIG_SYS_ENET -#else -#ifdef XILINX_EMACLITE_BASEADDR -#define CONFIG_XILINX_EMACLITE 1 -#define CONFIG_SYS_ENET -#endif -#endif -#undef ET_DEBUG - -/* gpio */ -#ifdef XILINX_GPIO_BASEADDR -#define CONFIG_SYS_GPIO_0 1 -#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR -#endif - -/* interrupt controller */ -#ifdef XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0 1 -#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS -#endif - -/* timer */ -#ifdef XILINX_TIMER_BASEADDR -#if (XILINX_TIMER_IRQ != -1) -#define CONFIG_SYS_TIMER_0 1 -#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR -#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -#define FREQUENCE XILINX_CLOCK_FREQ -#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -#endif -#else -#ifdef XILINX_CLOCK_FREQ -#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -#error BAD CLOCK FREQ -#endif -#endif -/* FSL */ -/* #define CONFIG_SYS_FSL_2 */ -/* #define FSL_INTR_2 1 */ - -/* - * memory layout - Example - * TEXT_BASE = 0x1200_0000; - * CONFIG_SYS_SRAM_BASE = 0x1000_0000; - * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; - * - * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 - * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 - * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 - * - * 0x1000_0000 CONFIG_SYS_SDRAM_BASE - * FREE - * 0x1200_0000 TEXT_BASE - * U-BOOT code - * 0x1202_0000 - * FREE - * - * STACK - * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE - * MALLOC_AREA 256kB Alloc - * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE - * MONITOR_CODE 256kB Env - * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd - * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - */ - -/* ddr sdram - main memory */ -#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -/* global pointer */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ -/* start of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - -/* monitor code */ -#define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN SIZE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) - -/* stack */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MONITOR_BASE - -/*#define RAMENV */ -#define FLASH - -#ifdef FLASH - #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START - #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE - #define CONFIG_SYS_FLASH_CFI 1 - #define CONFIG_FLASH_CFI_DRIVER 1 - #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ - - #ifdef RAMENV - #define CONFIG_ENV_IS_NOWHERE 1 - #define CONFIG_ENV_SIZE 0x1000 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - - #else /* !RAMENV */ - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - #define CONFIG_ENV_SIZE 0x40000 - #endif /* !RAMBOOT */ -#else /* !FLASH */ - /* ENV in RAM */ - #define CONFIG_SYS_NO_FLASH 1 - #define CONFIG_ENV_IS_NOWHERE 1 - #define CONFIG_ENV_SIZE 0x1000 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ -#endif /* !FLASH */ - -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR - #define CONFIG_SYSTEMACE - /* #define DEBUG_SYSTEMACE */ - #define SYSTEMACE_CONFIG_FPGA - #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR - #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH - #define CONFIG_DOS_PARTITION -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MFSL - -#ifndef CONFIG_SYS_ENET - #undef CONFIG_CMD_NET -#else - #define CONFIG_CMD_PING -#endif - -#if defined(CONFIG_SYSTEMACE) - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -#endif - -#if defined(FLASH) - #define CONFIG_CMD_ECHO - #define CONFIG_CMD_FLASH - #define CONFIG_CMD_IMLS - #define CONFIG_CMD_JFFS2 - - #if !defined(RAMENV) - #define CONFIG_CMD_ENV - #define CONFIG_CMD_SAVES - #endif -#else - #undef CONFIG_CMD_FLASH -#endif - -#if defined(CONFIG_CMD_JFFS2) -/* JFFS2 partitions */ -#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ -#define MTDIDS_DEFAULT "nor0=ml401-0" - -/* default mtd partition table */ -#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ - "256k(env),3m(kernel),1m(romfs),"\ - "1m(cramfs),-(jffs2)" -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "U-Boot-mONStR> " -#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ - -#define CONFIG_BOOTDELAY 30 -#define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "ml401" -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD - -/* architecture dependent code */ -#define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" - -#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ - "nor0=ml401-0\0"\ - "mtdparts=mtdparts=ml401-0:"\ - "256k(u-boot),256k(env),3m(kernel),"\ - "1m(romfs),1m(cramfs),-(jffs2)\0" - -#define CONFIG_CMDLINE_EDITING - -#endif /* __CONFIG_H */