From: Marek Szyprowski m.szyprowski@samsung.com
This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update his environment if it is already configured to get this feature working out of the box.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com --- configs/rpi_4_32b_defconfig | 9 +++++++++ configs/rpi_4_defconfig | 10 ++++++++++ configs/rpi_arm64_defconfig | 9 ++++++++- 3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig index 72cda5d..0dd763f 100644 --- a/configs/rpi_4_32b_defconfig +++ b/configs/rpi_4_32b_defconfig @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,6 +17,8 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y CONFIG_ENV_FAT_INTERFACE="mmc" @@ -28,12 +32,17 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index 6d148da..f80e5da 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,6 +17,8 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y CONFIG_ENV_FAT_INTERFACE="mmc" @@ -28,12 +32,18 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index fea86be..926dfc3 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -7,13 +7,14 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y -CONFIG_PREBOOT="usb start" +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y @@ -26,11 +27,17 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_DWC2=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y