[U-Boot] Banan Pro (ahci-sunxi) SATA port stopped working after switching to U-Boot v2016.01

Hello,

tonight I switched to the new U-Boot v2016.01 on my Banana Pro system. I compiled u-boot, like I did with all the working versions before, with: make Bananapro_defconfig make

But with the new U-Boot installed the SATA Port did not work anymore. The Kernel is the same 4.0.9-gentoo as I used before with the last U-Boot Release v2015.10

dmesg show me the following error in the kernel log: [ 1.925032] ahci-sunxi 1c18000.sata: PHY power up failed. [ 1.930661] ahci-sunxi: probe of 1c18000.sata failed with error -5

I also see now SATA message at the U-Boot bootscreen, the v2015.10 shows me that a SATA Port was recognized by the U-Boot loader.

Regards Markus Baier