On 12/9/24 12:11, Michal Simek wrote:
In Kria SOM configuration DP is under reset and access to DP is causing hang that's why call reset at probe to avoid this situation.
Signed-off-by: Michal Simek michal.simek@amd.com
drivers/video/zynqmp/zynqmp_dpsub.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/video/zynqmp/zynqmp_dpsub.c b/drivers/video/zynqmp/zynqmp_dpsub.c index 76abfeac4433..52af23c3c835 100644 --- a/drivers/video/zynqmp/zynqmp_dpsub.c +++ b/drivers/video/zynqmp/zynqmp_dpsub.c @@ -11,6 +11,7 @@ #include <dm.h> #include <errno.h> #include <generic-phy.h> +#include <reset.h> #include <stdlib.h> #include <video.h> #include <wait_bit.h> @@ -2093,10 +2094,15 @@ static int zynqmp_dpsub_probe(struct udevice *dev) { struct video_priv *uc_priv = dev_get_uclass_priv(dev); struct zynqmp_dpsub_priv *priv = dev_get_priv(dev);
struct reset_ctl_bulk resets; struct clk clk; int ret; int mode = RGBA8888;
ret = reset_get_bulk(dev, &resets);
if (!ret)
reset_deassert_bulk(&resets);ret = clk_get_by_name(dev, "dp_apb_clk", &clk); if (ret < 0) { dev_err(dev, "failed to get clock\n");
Applied. M