Hi,
Can you elaborate more on which file or function to look at? I am quite new to u-boot.
On Thu, Oct 6, 2016 at 11:31 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On Tue, Oct 4, 2016 at 1:10 PM, Teoh Choon Zone choon-zone.teoh@vie.com.my wrote:
Hi all,
I have a custom board based on Altera Cyclone V SoC, when I tried to boot from QSPI, it stuck in a boot loop, I try to enable some debug message,
and
here it is:
U-Boot SPL 2016.09.01 (Oct 03 2016 - 18:14:42) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete bind node soc
- found match at 'generic_simple_bus'
bind node dwmmc0@ff704000
- found match at 'socfpga_dwmmc'
Bound device dwmmc0@ff704000 to soc bind node spi@ff705000
- found match at 'cadence_spi'
bind node n25q00@0 No match for node 'n25q00@0' Bound device spi@ff705000 to soc Bound device soc to root_driver Trying to boot from SPI Bound device spi_flash to spi@ff705000 SF: Got idcodes 00000000x: x x x x x .!.D
u-boot from Altera working fine, but I plan to use the mainline u-boot.
Any
idea why it does not work?
Look like some controller init issue for getting RDID, try to probe in u-boot instead SPL.
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.