Dear All
We are using ubispl to load u-boot from a UBI volume on a TI am335x based board using the am335x_spl_bch driver. In the current ubispl code (common/spl/spl_ubi.c, line 45), the number of PEBs is hardcoded to CONFIG_SPL_UBI_MAX_PEBS.
In order to support multiple hardware variants with different flash sizes with one SPL, it would be nice to set this value on the fly. However if I understand correctly, the SPL nand driver does not autodetect such properties.
Is there a practical way to determine this value in the SPL context? Or should it be provided by board init code? What would be the preferred way to handle this?
Thanks in advance!
Markus
Markus Klotzbuecher Embedded System Architect