Hi Roger,
Am Samstag, 13. Februar 2021, 16:59:01 CET schrieb Roger Pau Monne:
From: Roger Pau Monné royger@FreeBSD.org
Using a non-default SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR setting makes the resulting u-boot-rockchip.bin unbootable, as it gets stuck after SPL. Removing the setting from the defconfig allows U-Boot to load successfully.
Hmm, I'd disagree slightly.
In the rockchip-common.h the CONFIG_SPL_PAD_TO is defined as
/* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */ #define CONFIG_SPL_PAD_TO 8355840
so it's a static value but based on the MMCSD_RAW_MODE... config option.
So instead of mandating one specific MMCSD_RAW_MODE... value that CONFIG_SPL_PAD_TO should be defined based on the the actual config value of CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and not some static number that then gets enforced for all boards.
Heiko
Signed-off-by: Roger Pau Monné royger@FreeBSD.org
Cc: Heiko Stuebner heiko.stuebner@theobroma-systems.com
configs/odroid-go2_defconfig | 1 - 1 file changed, 1 deletion(-)
diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index 853890901a..5632b15611 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -33,7 +33,6 @@ CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_CRC32_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y