On Fri, Mar 19, 2010 at 10:49:27AM +0500, Nikolay Petukhov wrote:
2010/3/19 Scott Wood scottwood@freescale.com:
Is the second RNDOUT OK on small page NAND?
I have NAND chip with 2K page size. NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Here, the positive results of operation of the at91_nand with small pages http://patchwork.ozlabs.org/patch/4049/
- //struct atmel_nand_host *host = nand_chip->priv;
Just remove the line.
Done
-Scott
This is a patch to use the hardware ECC controller of the AT91SAM9260 for the AT91 nand. Taken from the kernel 2.6.33.
Signed-off-by: Nikolay Petukhov Nikolay.Petukhov@gmail.com
Applied to u-boot-nand-flash next, but it took some manual editing of the e-mail to apply. Please don't let quoted printable be used when sending a patch (git seems to kind of support it, but I had to unwrap a couple lines manually, and if "git am" fails, the standard patch utility cannot be used), and make sure any comments which aren't to become part of the changelog go below a --- line.
It's usually simpler to just send the new patch in a separate e-mail rather than combined with a discussion reply.
-Scott