-----Original Message----- From: Simon Guinot [mailto:simon.guinot@sequanux.org] Sent: 16 May 2012 19:51 To: Prafulla Wadaskar Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guinot Subject: [PATCH 5/6] ARM: add support for Network Space v2 Lite and Mini
This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared.
- CPU: Marvell 88F6192 800Mhz
- SDRAM memory: 128MB DDR2 200Mhz
- 1 SATA port: internal
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports (Lite only): host and host/device
- 1 push button
- 1 SATA LED (bi-color, blue and red)
Signed-off-by: Simon Guinot simon.guinot@sequanux.org
arch/arm/include/asm/mach-types.h | 13 +++
I think the updates to this file to be done by ARM maintainer.
board/LaCie/common/common.c | 36 ++++++- board/LaCie/common/common.h | 1 + board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 4 + boards.cfg | 2 + include/configs/lacie_kw.h | 26 ++++- 7 files changed, 237 insertions(+), 7 deletions(-) create mode 100644 board/LaCie/netspace_v2/kwbimage-ns2l.cfg
Again, can the current cfg files be reused? Instead of adding new?
Regards.. Prafulla . . .