-----Original Message----- From: Abel Vesa Sent: 2019年1月29日 19:35 To: Tom Rini trini@konsulko.com; Fabio Estevam fabio.estevam@nxp.com; u-boot@lists.denx.de; dl-uboot-imx uboot-imx@nxp.com; Peng Fan peng.fan@nxp.com Cc: Nitin Garg nitin.garg@nxp.com; Abel Vesa abel.vesa@nxp.com Subject: [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support
Add the DM_GPIO related config for mx6sabreauto. Also add the gpio request calls.
Signed-off-by: Abel Vesa abel.vesa@nxp.com
board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++ configs/mx6sabreauto_defconfig | 1 + 2 files changed, 4 insertions(+)
diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c index c8f1263..c7e3e67 100644 --- a/board/freescale/mx6sabreauto/mx6sabreauto.c +++ b/board/freescale/mx6sabreauto/mx6sabreauto.c @@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
static void setup_iomux_backlight(void) {
- gpio_request(IMX_GPIO_NR(2, 9), "backlight"); gpio_direction_output(IMX_GPIO_NR(2, 9), 1); SETUP_IOMUX_PADS(backlight_pads);
} @@ -594,6 +595,7 @@ int board_init(void) else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1); /* I2C 3 Steer */
- gpio_request(IMX_GPIO_NR(5, 4), "steer logic"); gpio_direction_output(IMX_GPIO_NR(5, 4), 1); SETUP_IOMUX_PADS(i2c3_pads);
#ifndef CONFIG_SYS_FLASH_CFI @@ -602,6 +604,7 @@ int board_init(void) else setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2); #endif
- gpio_request(IMX_GPIO_NR(1, 15), "expander en"); gpio_direction_output(IMX_GPIO_NR(1, 15), 1); SETUP_IOMUX_PADS(port_exp);
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index c64ec66..4a9739c 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -60,6 +60,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y +CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y
Reviewed-by: Peng Fan peng.fan@nxp.com
-- 2.7.4