19 Nov
2015
19 Nov
'15
6:29 p.m.
Hi Fabio,
On 19/11/2015 18:15, Fabio Estevam wrote:
It is interesting that I do not see the problem if I don't use SPL.
Confirmed, I see the same. It looks like that the BootROM can, but SPL no. I supposed an isseu with the frequency, and I set it in SPL to 25Mhz, but it does not help.
For example: on a mx6qsabresd I can boot the SanDisk card without issues if I boot the mx6qbsabresd_deconfig target (u-boot.imx binary).
However, if I try booting the mx6sabresd_spl_defconfig (SPL + u-boot.img) the boot fails with the same error as I noticed on the mx6ul board.
So it seems this is is SPL MMC related problem.
Right, I see the same.
Bet regards, Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================