From: Ye Li ye.li@nxp.com
Found the lposc fuse loading having impact to cpu idle in kernel. Without the loading in dual boot mode, kernel will hang after idle for a while.
Reviewed-by: Peng Fan peng.fan@nxp.com Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- board/freescale/imx8ulp_evk/spl.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/board/freescale/imx8ulp_evk/spl.c b/board/freescale/imx8ulp_evk/spl.c index e6949b5e43..9bc9081617 100644 --- a/board/freescale/imx8ulp_evk/spl.c +++ b/board/freescale/imx8ulp_evk/spl.c @@ -76,10 +76,8 @@ void spl_board_init(void)
/* After AP set iomuxc0, the i2c can't work, Need M33 to set it now */
- /* Load the lposc fuse for single boot to work around ROM issue, - * The fuse depends on S400 to read. - */ - if (is_soc_rev(CHIP_REV_1_0) && get_boot_mode() == SINGLE_BOOT) + /* Load the lposc fuse to work around ROM issue. The fuse depends on S400 to read. */ + if (is_soc_rev(CHIP_REV_1_0)) load_lposc_fuse();
upower_init();