We have 2GB’s of RAM starting at 0x70000000 on our Freescale MX53 based board.
With old U-Boot we defined TEXT_BASE at the bottom of RAM at 0x70600000 and CONFIG_SKIP_RELOCATE_UBOOT, presumably so that we can run memory tests all the way to the top of RAM (this was brought over from the mx53loco board and precedes me). Why else would CONFIG_SKIP_RELOCATE_UBOOT be set?
In new U-Boot we are not skipping relocation. I define CONFIG_SYS_TEXT_BASE = 0xeff89000 so that relocation offset is 0x00000000.
I run with DEBUG on to doublecheck where things get setup…
I run a memory test from 0x70000000 to 0xefe88cb0, but I get a mismatch fail at 0xefe88aa4.
Shouldn’t I be able to run mem test all the way to the stack? I don’t see anything else being setup under the stack.
-- View this message in context: http://u-boot.10912.n7.nabble.com/Memory-test-post-relocation-tp196088.html Sent from the U-Boot mailing list archive at Nabble.com.