On 04/22/2017 05:47 PM, Andreas Färber wrote:
Am 22.04.2017 um 16:19 schrieb Heinrich Schuchardt:
On 04/22/2017 03:10 PM, Andreas Färber wrote:
Am 22.04.2017 um 14:59 schrieb Heinrich Schuchardt:
On 01/15/2017 07:52 PM, Andreas Färber wrote:
Use the generic "distro" boot framework to enable automatic DHCP boot.
The fdt and kernel addresses are adopted from downstream; ramdisk and scriptaddr addresses were chosen arbitrarily.
Signed-off-by: Andreas Färber afaerber@suse.de
...
diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h index 1d5b3d5..bf7e1af 100644 --- a/include/configs/odroid-c2.h +++ b/include/configs/odroid-c2.h @@ -12,6 +12,8 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200
+#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0"
do you remember why you chose to put meson-gxbb-odroidc2.dtb into subdirectory amlogic?
I chose that directory name when I added GXBaby support to the kernel:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch...
Note that we had a discussion about this a while ago when I sent patches to amend the distro framework's dtb search paths, and Tom's decision was to instead hardcode the vendor dirs inside $fdtfile.
I am aware that in the Linux Kernel vendor subdirectories are used for arm64 dtbs.
And therefore that is the expected installation location of the .dtb files shipped with the kernel. If your distro wants to differ, you are free to compensate with symlinks - which is what has been forced onto us with the old situation.
I was questioning about U-Boot. I could not find any usage of subdirectories for other arm64 boards:
hikey_defconfig: fdtfile=hi6220-hikey.dtb dragonboard410c_defconfig: fdtfile=apq8016-sbc.dtb
but
odroid-c2_defconfig: fdtfile=amlogic/meson-gxbb-odroidc2.dtb
I mentioned RPi3:
board/raspberrypi/rpi/rpi.c:#define DTB_DIR "broadcom/"
Like I said, patches welcome. HiKey and Dragonboard410c not yet running an official JeOS image (cf. my BUD17 talk) may be one reason we haven't bothered yet. Also it wasn't clear to me what Tom wanted exactly based on his reply, so I never followed up. For sunxi, search the list for "fdtfile" in the subject. Need to do some more shopping, so can't help you search right now.
I am not on JeOS. I referred to Debian.
This the result for sunxi: pine64_plus_defconfig: fdtfile=sun50i-a64-pine6-plus.dtb
According doc/README.pxe ftdfile was never meant to contain a path. If you want a path this should be defined as ftddir.
So Odroid C2 is buggy and we should clean up the fdtfile variable.
Best regards
Heinrich Schuchardt
Regards, Andreas