From: Andreas Huber andreas.huber@keymile.com
Add support for a second flash. By default, a single flash chip is set up: - called 'boot' - mtd name for ubi 'ubi0' MTDIDS and MTDPARTS may be overwritten to add a second flash. The 'ubiattach' command is featured in two versions: - if CONFIG_KM_UBI_PARTITION_NAME_APP is not defined: this is the version as up to now - if CONFIG_KM_UBI_PARTITION_NAME_APP is defined: a check on 'actual_bank' will be done to determine the flash to boot from.
Use CONFIG_KM_UBI_PARTITION_NAME_BOOT and CONFIG_KM_UBI_PARTITION_NAME_APP to define where to put the bootloader and the applications.
Example: In the board config do: ... snip ...
"boot:" \ "768k(u-boot)," \ "128k(env)," \ "128k(envred)," \ "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \ "app:" \ "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
... snap ...
You may also need to enable the second flash: ... snip ... /* additional featured for COGE5 */ ... snap ...
Signed-off-by: Andreas Huber andreas.huber@keymile.com cc: Kim Phillips kim.phillips@freescale.com cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Gerlando Falauto gerlando.falauto@keymile.com Signed-off-by: Holger Brunck holger.brunck@keymile.com --- v2: - v1 introduces compile error for 82xx boards, now fixed
include/configs/km/keymile-common.h | 34 +++++++++++++++++++++++++--------- include/configs/km/km82xx-common.h | 2 +- include/configs/km/km83xx-common.h | 11 ++++++++--- include/configs/km/km_arm.h | 15 +++++++++------ 4 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 7a01705..4f606a0 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -126,12 +126,29 @@ "netdev=eth0\0" #endif
-#ifndef CONFIG_KM_UBI_PARTITION_NAME -#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" -#endif -#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME -#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0" -#endif +#ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ + +#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP +/* one flash chip only called boot */ +/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +# define CONFIG_KM_UBI_LINUX_MTD \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT +# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ + "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" +#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ +/* two flash chips called boot and app */ +/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +/* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ +# define CONFIG_KM_UBI_LINUX_MTD \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP +# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ + "ubiattach=if test ${boot_bank} -eq 0; then; " \ + "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; " \ + "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0" +#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
#define xstr(s) str(s) #define str(s) #s @@ -173,7 +190,7 @@ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ " mem=${kernelmem} init=${init}" \ " phram.phram=phvar,${varaddr}," xstr(CONFIG_KM_PHRAM) \ - " ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ + " " CONFIG_KM_UBI_LINUX_MTD " " \ CONFIG_KM_DEF_BOOT_ARGS_CPU \ "\0" \ "addpanic=" \ @@ -199,10 +216,9 @@ #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ "cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \ "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \ - "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME "\0" \ "ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \ " bootfs${boot_bank}\0" \ - "" + CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
/* * constants diff --git a/include/configs/km/km82xx-common.h b/include/configs/km/km82xx-common.h index 02a82a6..2c763bb 100644 --- a/include/configs/km/km82xx-common.h +++ b/include/configs/km/km82xx-common.h @@ -73,7 +73,7 @@ "128k(env)," \ "128k(envred)," \ "3072k(free)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ")"
/* * Default environment settings diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 06ecb8a..2c266fa 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -15,13 +15,18 @@ #include "keymile-common.h" #include "km-powerpc.h"
-#define MTDIDS_DEFAULT "nor0=boot" -#define MTDPARTS_DEFAULT "mtdparts=" \ +#ifndef MTDIDS_DEFAULT +# define MTDIDS_DEFAULT "nor0=boot" +#endif /* MTDIDS_DEFAULT */ + +#ifndef MTDPARTS_DEFAULT +# define MTDPARTS_DEFAULT "mtdparts=" \ "boot:" \ "768k(u-boot)," \ "128k(env)," \ "128k(envred)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" +#endif /* MTDPARTS_DEFAULT */
#define CONFIG_MISC_INIT_R /* diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index c73a10c..011f838 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -229,11 +229,15 @@ int get_scl(void);
#define FLASH_GPIO_PIN 0x00010000
-#define MTDIDS_DEFAULT "nand0=orion_nand" -/* test-only: partitioning needs some tuning, this is just for tests */ -#define MTDPARTS_DEFAULT "mtdparts=" \ - "orion_nand:" \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" +#ifndef MTDIDS_DEFAULT +# define MTDIDS_DEFAULT "nand0=orion_nand" +#endif /* MTDIDS_DEFAULT */ + +#ifndef MTDPARTS_DEFAULT +# define MTDPARTS_DEFAULT "mtdparts=" \ + "orion_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" +#endif /* MTDPARTS_DEFAULT */
#define CONFIG_KM_DEF_ENV_UPDATE \ "update=" \ @@ -257,7 +261,6 @@ int get_scl(void); ""
#if defined(CONFIG_SYS_NO_FLASH) -#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" #undef CONFIG_FLASH_CFI_MTD #undef CONFIG_JFFS2_CMDLINE #endif