sun8i can share the PSCI backend with sun6i. Only difference is sun8i does not have CPU power clamp controls.
Signed-off-by: Chen-Yu Tsai wens@csie.org --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 4 ++++ 2 files changed, 5 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 4b783e0..76c7e55 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -37,6 +37,7 @@ ifndef CONFIG_SPL_BUILD ifdef CONFIG_ARMV7_PSCI obj-$(CONFIG_MACH_SUN6I) += psci_sun6i.o obj-$(CONFIG_MACH_SUN7I) += psci_sun7i.o +obj-$(CONFIG_MACH_SUN8I) += psci_sun6i.o endif endif
diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S index 2516804..d4cb51e 100644 --- a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S +++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S @@ -124,11 +124,13 @@ psci_fiq_enter: str r10, [r8, #0x100] timer_wait r10, ONE_MS
+#ifdef CONFIG_MACH_SUN6I @ Activate power clamp lsl r12, r9, #2 @ x4 add r12, r12, r8 mov r10, #0xff str r10, [r12, #0x140] +#endif
movw r8, #(SUN6I_CPUCFG_BASE & 0xffff) movt r8, #(SUN6I_CPUCFG_BASE >> 16) @@ -186,6 +188,7 @@ psci_cpu_on: movw r0, #(SUNXI_PRCM_BASE & 0xffff) movt r0, #(SUNXI_PRCM_BASE >> 16)
+#ifdef CONFIG_MACH_SUN6I @ Release power clamp lsl r5, r1, #2 @ 1 register per CPU add r5, r5, r0 @ PRCM @@ -194,6 +197,7 @@ psci_cpu_on: 1: lsrs r6, r6, #1 str r6, [r5, #0x140] @ CPUx_PWR_CLAMP bne 1b +#endif
timer_wait r6, TEN_MS