23 Jan
2021
23 Jan
'21
4:49 p.m.
From: Marc Ferland ferlandm@amotus.ca This patch converts the dart6ul ethernet support to DM_ETH and cleans up the legacy ethernet code. The clean up, more specifically:
- moves the fec2 node and pin definition to the carrier board DTS since the phy associated with it is on the carrier board and not on the SoM;
- add the reset pin associated to each phy;
- separate the ethernet, mdio and reset pins of each fec so that they are easier to reference;
- add clock properties to the phy nodes since they are connected to the 50Mhz ENET[12]_TX_CLK clock of the SoC;
- remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty.
Signed-off-by: Marc Ferland ferlandm@amotus.ca
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================