Hi Peter and Tommaso,
On Wed, Dec 29, 2021 at 7:38 PM Fabio Estevam festevam@gmail.com wrote:
Yes, according to Peter, the failure comes only during the second call to get_board_value()
I managed to get my Udoo Neo board working again.
With only the change below on top of Peter's series, I can get the board version to be printed correctly:
--- a/board/udoo/neo/neo.c +++ b/board/udoo/neo/neo.c @@ -383,18 +383,13 @@ static char *board_string(void) return "UNDEFINED"; }
-int checkboard(void) -{ - printf("Board: UDOO Neo %s\n", board_string()); - return 0; -} - int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG env_set("board_name", board_string()); #endif
+ printf("Board: UDOO Neo %s\n", board_string()); return 0; }
U-Boot log:
U-Boot SPL 2022.01-rc4-00031-gc5c4ced998e3-dirty (Dec 29 2021 - 20:03:26 -0300) Trying to boot from MMC1
U-Boot 2022.01-rc4-00031-gc5c4ced998e3-dirty (Dec 29 2021 - 20:03:26 -0300)
CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 64C Reset cause: POR Model: UDOO Neo Basic I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Board: UDOO Neo FULL Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 ethernet@2188000 Waiting for PHY auto negotiation to complete.......user interrupt! Could not initialize PHY ethernet@2188000 BOOTP broadcast 1