Hi,
On Fri, Jun 09, 2017 at 09:24:19PM +0800, Ziping Chen wrote:
From: Ziping Chen techping.chan@gmail.com
The SinA83T is an A83T core/daughter board combo from Sinlinx.
Add support for it.
Signed-off-by: Ziping Chen techping.chan@gmail.com
arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts | 107 ++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 6 ++ configs/Sinlinx_SinA83T_defconfig | 21 ++++++ 4 files changed, 136 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts create mode 100644 configs/Sinlinx_SinA83T_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8b8f5e9e76..c0eae9f443 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -305,7 +305,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \
- sun8i-a83t-sinovoip-bpi-m3.dtb
- sun8i-a83t-sinovoip-bpi-m3.dtb \
- sun8i-a83t-sinlinx-sina83t.dtb
DT should be ordered alphabetically, so before the BPi M3.
dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ diff --git a/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts new file mode 100644 index 0000000000..ae50e022d4 --- /dev/null +++ b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts @@ -0,0 +1,107 @@ +/*
- Copyright 2017 Ziping Chen
- Ziping Chen techping.chan@gmail.com
- This file is dual-licensed: you can use it either under the terms
- of the GPL or the X11 license, at your option. Note that this dual
- licensing only applies to this file, and not this project as a
- whole.
- a) This file is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This file is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- Or, alternatively,
- b) Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without
restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.- */
+/dts-v1/; +#include "sun8i-a83t.dtsi" +#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h>
+/ {
- model = "Sinlinx SinA83T";
- compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t";
- aliases {
serial0 = &uart0;- };
- chosen {
stdout-path = "serial0:115200n8";- };
- leds {
compatible = "gpio-leds";usr_led {label = "sinlinx:blue:usr";gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */default-state = "on";};- };
+};
+#define USB_CLASS_HUB 9
+&ehci0 {
- /* USB 2.0 4 port hub IC */
- status = "okay";
- #address-cells = <2>;
- #size-cells = <2>;
- hub {
compatible = "usb-hub";usb,device-class = <USB_CLASS_HUB>;#address-cells = <1>;#size-cells = <0>;- };
+};
+&ehci1 {
- status = "okay";
+};
+&ohci0 {
- status = "okay";
+};
+&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
+};
+&usb_otg {
- status = "okay";
+};
Can you contribute that DT with Linux first? We share them with Linux, and it should be accepted there first.
Thanks! Maxime